Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match the tool to the access and the level of seizing. Screw-puller: standard mechanical force, used for routine bearing removal where the puller can grip the bearing's outer race and drive force through a centre-screw. Hydraulic puller: higher force in a controlled stroke, used for seized bearings or where mechanical force can't shift the component. Slide-hammer: impact force, used for blind-bore bearings (where the back of the bearing isn't accessible from behind) and stuck shafts. Most workshops carry all three for different access situations.

A blind-bore puller has expanding internal jaws that grip the bearing's inner race from inside the bore — used where the bearing is fitted into a blind hole (housing closed at the back) so a conventional puller can't reach behind the bearing to grip its outer race. Common applications: pilot bearings in flywheels, bushings in housing covers, sealed bearings in rear hubs. The puller's expanding jaw is sized to the bearing ID; the slide-hammer or impact tool drives the bearing out the front of the bore.

Yes. Trade bearing-driver kits typically include a complete set of cones and discs (or split discs) covering the standard bearing OD and ID range — used to drive bearings into housings or onto shafts without damaging the bearing's race or seal. Each cone or disc fits the bearing dimension and applies driving force evenly across the race face, preventing the brinelling or race damage that hammer-and-punch fitting causes. The kit's size range is listed on every product page.

Two main matches: (1) bearing OD range — the puller's jaw set must cover the typical bearing sizes (20-50mm for small bearings, 50-100mm for general automotive, 100mm+ for HGV and plant); (2) puller-arm reach — the depth of the bearing in its housing or recess; some pullers have extended-reach jaws for deep-mounted bearings. For mixed work, the trade-grade kits typically cover 20-80mm OD with assorted jaw lengths. WhatsApp 07754288583 for application-specific advice on larger or unusual bearing sizes.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Bearing Tools

FilterFilters
View as Grid List

Within Automotive Pullers, Bearing Tools covers the specialist tools used to install, remove, and service bearings on shafts, in housings, and within sealed assemblies — covering bearing-puller jaws, blind-bore bearing pullers, slide-hammer bearing pullers, bearing-driver tool sets, bearing-fitting cones and discs, and the matching tools for race-and-cup work in tapered-roller-bearing applications.

Parts for Machines supplies bearing tools across the trade and professional ranges, covering both general-purpose bearing-pulling-and-fitting tools and specialist tools for hard-access bearing applications (blind-bore work, sealed-bearing recovery, race-and-cup work).

We are an authorised distributor and seller of Sykes-Pickavant across the bearing tool range. Sykes-Pickavant is widely specified in independent garages, fleet workshops, and franchised dealerships for bearing-service work — covering bearing-puller kits with assorted jaw sizes, blind-bore puller sets sized for the common automotive bearing diameters, slide-hammer puller assemblies, and bearing-driver tool sets covering the standard bearing OD and ID dimensions.

Product pages list the tool type (bearing puller, blind-bore puller, slide-hammer, bearing driver, race-and-cup tool), the size range covered (the bearing diameter range the tool fits — typically 20-100mm OD for trade automotive kits; up to 250mm OD for HGV and plant kits), the operating mechanism (mechanical screw, hydraulic, slide-hammer impact), the kit contents for multi-piece sets (the number of jaw sizes, drivers, or cones included), and the rated capacity in tonnes. For typical automotive bearing service (wheel bearings, gearbox shaft bearings, alternator bearings), a 20-80mm OD bearing puller-and-driver kit covers most applications. For HGV, agricultural, and plant work, larger-capacity kits with extended size range are required. The size range is listed on every kit's product page. Trade pricing on multi-tool and workshop-kit orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 31 to 60 of 71 entries
FAQs

Match the tool to the access and the level of seizing. Screw-puller: standard mechanical force, used for routine bearing removal where the puller can grip the bearing's outer race and drive force through a centre-screw. Hydraulic puller: higher force in a controlled stroke, used for seized bearings or where mechanical force can't shift the component. Slide-hammer: impact force, used for blind-bore bearings (where the back of the bearing isn't accessible from behind) and stuck shafts. Most workshops carry all three for different access situations.

A blind-bore puller has expanding internal jaws that grip the bearing's inner race from inside the bore — used where the bearing is fitted into a blind hole (housing closed at the back) so a conventional puller can't reach behind the bearing to grip its outer race. Common applications: pilot bearings in flywheels, bushings in housing covers, sealed bearings in rear hubs. The puller's expanding jaw is sized to the bearing ID; the slide-hammer or impact tool drives the bearing out the front of the bore.

Yes. Trade bearing-driver kits typically include a complete set of cones and discs (or split discs) covering the standard bearing OD and ID range — used to drive bearings into housings or onto shafts without damaging the bearing's race or seal. Each cone or disc fits the bearing dimension and applies driving force evenly across the race face, preventing the brinelling or race damage that hammer-and-punch fitting causes. The kit's size range is listed on every product page.

Two main matches: (1) bearing OD range — the puller's jaw set must cover the typical bearing sizes (20-50mm for small bearings, 50-100mm for general automotive, 100mm+ for HGV and plant); (2) puller-arm reach — the depth of the bearing in its housing or recess; some pullers have extended-reach jaws for deep-mounted bearings. For mixed work, the trade-grade kits typically cover 20-80mm OD with assorted jaw lengths. WhatsApp 07754288583 for application-specific advice on larger or unusual bearing sizes.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service