







Save Extra With 1 Offer
A. The maximum capacity is 60 tonne, achieved at Stage 1. Capacity reduces to 40 tonne at Stage 2 and 20 tonne at Stage 3.
A. It is designed for lifting heavy plant, tractors and commercial vehicles, making it suitable for workshop or roadside use.
A. The minimum saddle height is 175mm, and the long reach, low entry chassis design is specifically intended for use where ground clearance is limited.
A. The jack is supplied with two extensions: a 45mm and a 75mm extension, which close the gap between the saddle and the vehicle jacking point.
A. The jack requires an air supply with a consumption rate of 11.5cfm.
A. Yes. It features a dead man's handle which provides extra safety and also aids controlled lowering speed.
A. The chassis length is 875mm, overall width is 295mm (215mm without wheels), and the maximum extended length is 2255mm.
A. Yes. The YAJ20B is a variant in the same product family - please check its listing for specific differentiating specifications.
A. Several alternatives are available depending on your capacity requirements: YAJ10-40LELR, YAJ15-30, YAJ15-30LE, and YAJ50-80LR. Each is a different product designed for the same general function at different capacities and configurations.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service