Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £20.34 | 7 to 10 working days |
Impact drivers demand bits that can withstand repeated high-torque shock loads without camming out or damaging fastener heads. The Draper TX-STAR® T25 impact screwdriver bits are engineered specifically for use with impact drivers, addressing the failure modes that standard screwdriver bits suffer under percussive drive conditions. Each bit is manufactured from S2 steel, correctly hardened and tempered for durability and long service life. The shock-absorbing torsion design is integral to the construction, increasing torque performance and helping the bit flex under impact rather than fracture. Precision ground tips engage the fastener precisely, preventing cam out and protecting screw heads from damage. The blackened 1/4" hex shank features a shot blast finish for a secure grip in the driver chuck. Highly visible laser-etched size markings on the shank allow for rapid identification. The T25 tip is compatible with Torx fixing systems. Note: This pack of 20 T25 x 50mm bits is supplied in a robust plastic case with a clear lid and sliding latch, keeping the set organised and protected between uses. Draper TX-STAR® products are compatible with Torx fixing systems.
These T25 Draper TX-STAR® impact screwdriver bits are made from S2 steel, which is correctly hardened and tempered for durability and long life. Each has a blackened 1/4" hex shank with a shot blast finish and precision ground tips to prevent cam out and screw damage. The shock absorbing torsion design increases torque performance. There are highly visible laser-etched size markings on the hex shank. Specifically designed for use with an impact driver. Supplied in a robust plastic case with a clear lid and sliding latch.
Product Key Feature:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1-3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Tip size | T25 |
|---|---|
| Tip type | TX-STAR |
| Bit length | 50mm |
| Shank type | Hex |
| Shank size | 1/4" |
| Material | S2 steel |
| Quantity | 20 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Draper 5499 Expert Cross Slot/PH Type Impact Screwdriver Bits, No.2 x 50mm, 1/4" Hex (Pack of 5)
£9.71
£9.52
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 05498 | 05499 | 05645 | 05646 | 05647 |
| Type | Impact | Impact | Impact | Impact | Impact |
| Length | 50mm | 50mm | 50mm | 50mm | 50mm |
| Size | 50mm | 50mm | 50mm | 50mm | 50mm |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Pack Qty | 5 | 5 | 5 | 5 | 5 |
| Size Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
A. Each bit has a T25 TX-STAR tip and measures 50mm in length, with a 1/4" hex shank for use with standard impact drivers.
A. The bits are manufactured from S2 steel, which is correctly hardened and tempered to deliver durability and long service life under impact driver use.
A. Each bit has precision ground tips specifically engineered to prevent cam out and protect screw heads from damage during use.
A. These bits are specifically designed for use with an impact driver. The shock-absorbing torsion design and S2 steel construction are optimised for the high-torque percussive loads produced by impact drivers.
A. Yes. Draper TX-STAR® products are compatible with Torx fixing systems.
A. The pack contains 20 T25 x 50mm TX-STAR® impact bits, supplied in a robust plastic case with a clear lid and sliding latch for organised storage.
A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase. Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN). You may also be asked to share images of the product and its packaging for verification. Items that do not meet these conditions will not be accepted for return. If your return is approved, we will initiate a refund to your credit card or original method of payment. A restocking fee of up to 15% of the order value may apply to each returned item.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes — WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility, and we'll help you choose the right product.
A. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
