Search
Search AI Assist

Oops! We didn’t find any matching result

Main Menu
5 Trustpilot Phone Phone 01926754100 Cart Cart
Img
FIT GUARANTEE or Hassle-Free Returns
Img
QUICK DELIVERY On All Products Across UK
Img
GREAT SUPPORT 24/7 Support For Any Query
Img
TRUSTPILOT RATING We Are Rated 5 Star on Trust Pilot

Shop by Category

FAQs

Surface preparation grit sequence depends on the starting condition and target finish. For bare metal weld-prep — start at 80 grit to dress weld beads and remove heavy contamination, finish at 120-180 grit. For stripping old paint — start at 40-80 grit for heavy stripping, work up. For panel finishing before primer — 180-220 grit. For final paint-prep on top-coat — 320-400 grit (wet or dry). Always work up through grits in 50% increments rather than jumping; a single coarse grit followed directly by a fine grit leaves visible scratch patterns through the paint.

Wire cup brushes mount on angle grinders and threaded shafts, used for general rust removal and surface stripping over flat or gently curved surfaces. Wire wheel brushes are mounted on bench grinders or drill chucks for narrower-area work, edge stripping, and detailed cleaning. End brushes (often called pencil brushes) are small-diameter, mounted on drills and die grinders for confined spaces, internal corners, and weld-spatter cleanup. Knot-wire brushes (twisted wire bundles) are aggressive — for heavy rust and weld scale. Crimped-wire brushes are gentler — for finishing and lighter work.

Service life varies enormously with the application — material, pressure applied, abrasive grade, and duty cycle all affect it. As a working guide, a 50-grit sanding belt on continuous metal weld-prep lasts 30–60 minutes of active use; a 120-grit belt on bodywork prep lasts 2–4 hours. Discs follow similar patterns. Replace once the cutting action drops noticeably, the belt or disc loads up with swarf, or the abrasive face shows visible wear. Consumables that overheat (changing colour, glazing) stop cutting effectively and should be discarded.

Yes — bulk-pack purchasing is the trade default. Belts and discs typically ship in 10, 25, or 50 per box; sheets and rolls in larger pack sizes. Trade pricing applies on bulk volume. For workshops with ongoing monthly consumption, contract-supply arrangements with scheduled deliveries are available — WhatsApp 07754288583 with the typical product mix and monthly volume. Specialist abrasive products (specific grit, specific dimensions, specific application) outside the standard range can typically be sourced to order with 5–10 working day lead times.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Sanding & Finishing

Within Cutting Grinding Sanding Polishing, Sanding and Finishing covers the abrasive consumables used for surface preparation, finishing, and polishing — sanding belts, sanding discs, sanding sheets, wire brushes, polishing pads, and the coated-abrasive products that prepare metal, wood, and composite surfaces for paint, weld, or final finish. Parts For Machines supplies the consumables used in trade and industrial finishing operations. The Sanding and Finishing range covers Coated Abrasives (sanding belts and discs in a wide range of grits — typically 40 grit through 320 grit, with finer grades for finishing work), the Wire Brush Range (cup brushes, wheel brushes, end brushes, and bench-grinder wire brushes for rust removal, surface prep, and finishing), Sanding Belts and Sanding Discs (specifically for belt sanders and disc sanders respectively), and specialist Coated Abrasives Additional Products including emery rolls and sheets. Parts For Machines is an Authorised Distributor and Seller of Abracs across abrasive consumables. The Abracs range covers the everyday workshop sanding and finishing requirement — coated-abrasive belts and discs sized to the major belt sander and orbital sander applications, wire brush ranges in cup, wheel, and end-brush formats, and the emery sheets and rolls used for hand finishing. Pack sizes for trade purchasing typically run 10, 25, or 50 per box depending on product and grade. Match the abrasive to the application: lower grit numbers (40–80 grit) for heavy material removal, rust stripping, and weld prep; medium grits (100–180) for general surface preparation before paint or finishing; finer grits (220–320 and beyond) for finish-coat preparation, hand finishing, and pre-polish work. The product page lists grit, dimensions, abrasive type (aluminium oxide for general use, zirconia for stainless and harder metals, silicon carbide for non-ferrous and stone work), and pack size. Trade pricing applies on bulk pack purchasing. For fleet workshops and ongoing contract supply, WhatsApp 07754288583 with the typical monthly consumption profile for a trade-supply quotation.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service