Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £20.34 | 7 to 10 working days |
Product Number: 05696
Impact driving places far greater stress on screwdriver bits than conventional hand driving, demanding materials and geometry engineered specifically for the task. These Draper Expert No.2 x 50mm PZ-type impact screwdriver bits are made from S2 steel, correctly hardened and tempered for durability and long life, and are specifically designed for use with an impact driver. Each bit features a blackened 1/4" hex shank with a shot blast finish and precision ground tips that prevent cam out and screw damage — a critical advantage when working at pace with high-torque outputs. The shock absorbing torsion design further increases torque performance by absorbing peak loads during driving cycles. Highly visible laser-etched size markings on the hex shank make identification straightforward in a busy workshop environment. The PZ-type tip profile is compatible with Pozidriv® and Supadriv® fixing systems, both of which are registered trademarks of Trifast Plc. The pack contains 20 bits, each measuring No.2 x 50mm with a 1/4" hex shank, and is supplied in a robust plastic case with a clear lid and sliding latch to keep the set organised and protected between uses. With S2 steel construction, torsion-zone engineering, and precision ground geometry across all 20 bits, this set delivers the consistency and durability required for sustained professional and trade use.
These No.2 PZ-type impact screwdriver bits are made from S2 steel, which is correctly hardened and tempered for durability and long life. Each has a blackened 1/4" hex shank with a shot blast finish and precision ground tips to prevent cam out and screw damage. The shock absorbing torsion design increases torque performance. There are highly visible laser-etched size markings on the hex shank. Specifically designed for use with an impact driver. Supplied in a robust plastic case with a clear lid and sliding latch.
Product Key Feature:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1-3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Tip size | No.2 |
|---|---|
| Tip type | PZ-type |
| Bit length | 50mm |
| Shank type | Hex |
| Shank size | 1/4" |
| Material | S2 steel |
| Quantity | 20 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Draper 5499 Expert Cross Slot/PH Type Impact Screwdriver Bits, No.2 x 50mm, 1/4" Hex (Pack of 5)
£9.71
£9.52
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 05498 | 05699 | 05499 | 05645 | 05649 |
| Type | Impact | Impact | Impact | Impact | Impact |
| Length | 50mm | 50mm | 50mm | 50mm | 50mm |
| Size | 50mm | 50mm | 50mm | 50mm | 50mm |
| Length Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
| Pack Qty | 5 | 20 | 5 | 5 | 5 |
| Size Range | 26-50mm | 26-50mm | 26-50mm | 26-50mm | 26-50mm |
A. These are PZ-type (Pozidriv) bits with a No.2 tip size and a 50mm bit length, fitted to a 1/4" hex shank.
A. The bits are made from S2 steel, which is correctly hardened and tempered for durability and long life.
A. Yes. The PZ-type profile is compatible with Pozidriv® and Supadriv® fixing systems. Pozidriv® and Supadriv® are registered trademarks of Trifast Plc.
A. Each bit features precision ground tips specifically engineered to prevent cam out and screw damage during impact driving.
A. Yes. These bits are specifically designed for use with an impact driver. The shock absorbing torsion design is engineered to increase torque performance under the high-load driving cycles that impact drivers produce.
A. The pack contains 20 No.2 x 50mm PZ-type bits, supplied in a robust plastic case with a clear lid and sliding latch.
A. Next-day delivery is available on most products and will appear as an option at checkout where eligible.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
