Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Because caliper guide bolts use patterns a normal set does not carry, and the pattern changes by manufacturer. Ten-point, seven-point, eleven-point, spline and long hex all appear on this leaf.

The listings name the vehicles. 10mm and 15mm ten-point suit VAG and Porsche, 14mm seven-point suits Audi Q7 and S4, and 8mm eleven-point suits Knorr-Bremse.

With a spreader, which pushes both pistons back evenly to accept new pads. A piston that has to be wound rather than pushed needs a cube or a wind-back tool instead, which is a different tool.

Shoe spring pliers at 300mm to handle the return springs, and shoe fitting tools for the hold-down pins. Drum work uses none of the caliper tooling.

With a digital brake disc caliper at 100mm, which reaches past the lip that forms at the disc edge. A normal caliper reads on that lip and gives a figure that is too high.

A breaker bar rather than a ratchet, since a ratchet mechanism is the weak point under shock load. The bars here run 450mm on 1/2 inch drive.

Clear

Caliper & Piston Tools

FilterFilters
View as Grid List

Caliper guide bolts use fastener heads that a normal socket set does not carry, and the pattern changes by manufacturer. Ten-point, seven-point, eleven-point, spline and long hex all appear on this leaf, and the pattern has to be read off the vehicle rather than guessed from the size.

The fitments held here name the vehicles they suit: 10mm and 15mm ten-point for VAG and Porsche, 14mm seven-point for Audi Q7 and S4, 8mm eleven-point for Knorr-Bremse, plus 20mm ten-point, H9 and M14 spline. A 7mm hex bit at 100mm long and an angled long-reach hex cover the recessed ones. Angled long-reach hex bits cover the guide bolts set behind a hub or a shield.

Piston work is the second job on the leaf. A spreader pushes both pistons back evenly to accept new pads, and a piston cube on 3/8 inch drive turns a piston that has to be wound rather than pushed. Drum work brings its own tools, with shoe spring pliers at 300mm and shoe fitting tools. Caliper support hooks hang the caliper clear rather than leaving it on the hose while pads are changed.

Measurement closes the job out, since pads and discs are replaced against a wear figure rather than by appearance. A digital brake disc caliper at 100mm reads disc thickness where a normal caliper cannot reach past the lip. Breaker bars at 450mm handle seized fasteners. For an unfamiliar caliper bolt head, a photo to 07754288583 on WhatsApp identifies the pattern faster than measuring it.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 136 entries
FAQs

Because caliper guide bolts use patterns a normal set does not carry, and the pattern changes by manufacturer. Ten-point, seven-point, eleven-point, spline and long hex all appear on this leaf.

The listings name the vehicles. 10mm and 15mm ten-point suit VAG and Porsche, 14mm seven-point suits Audi Q7 and S4, and 8mm eleven-point suits Knorr-Bremse.

With a spreader, which pushes both pistons back evenly to accept new pads. A piston that has to be wound rather than pushed needs a cube or a wind-back tool instead, which is a different tool.

Shoe spring pliers at 300mm to handle the return springs, and shoe fitting tools for the hold-down pins. Drum work uses none of the caliper tooling.

With a digital brake disc caliper at 100mm, which reaches past the lip that forms at the disc edge. A normal caliper reads on that lip and gives a figure that is too high.

A breaker bar rather than a ratchet, since a ratchet mechanism is the weak point under shock load. The bars here run 450mm on 1/2 inch drive.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service