Filters
Two different tools sit on this leaf and they are often confused. An oscillating multi-tool vibrates a blade through a very small arc, which lets it cut flush against a surface and plunge into the middle of a board. A rotary tool spins a small accessory at high speed for grinding, engraving and fine shaping.
Multi-tools are chosen on power and change system. A 300W corded machine with quick-change holds a blade without a spanner, which matters on a tool where blades swap constantly. Cordless bodies sit on Sealey SV10.8 and SV20, Draper D20 20V and Abracs RG 20V, taking the tool to work that a lead will not reach. Blades fit across brands more often than batteries do, so the platform commits you further than the blade fitting does.
Rotary tools are chosen on accessory count more than on the tool itself, because the accessories are what do the work. Kits here run 40, 49, 50, 57, 111 and 219 pieces, and a larger kit is worth having on a tool that grinds, cuts, polishes and engraves with a different fitting for each.
Smaller bodies cover the fine end. A 4V multifunction screwdriver and cutting tool handles detail work, and a 12V brushless right angle die grinder reaches into places a straight body cannot. Blades and accessories are the consumable and wear out faster than the tool. Questions go over WhatsApp on 07754288583 with the work being done. Draper and Sealey both hold engraver and grinder bodies sold bare for a platform already in use.
| Voltage | 230V |
|---|---|
| No load speed | 35,000rpm |
| Power | 135W |
| Weight | 0.23kg |
| No Load Speed | 15,000-22,000rpm |
|---|---|
| Oscillating Angle | 3 degrees |
| Power Output | 300W |
| Power Supply | 240V |
| Supplied In Case | No |
| Model No | CP1207 |
|---|---|
|
Battery:Options: 12V 1.5Ah Lithium-ion, 12V 3Ah Lithium-ion, 12V 4Ah Lithium-ion (not included)
|
|
| Brand | Sealey |
| Collets | 1, 1.5, 2, 2.4, 3.2mm |
| Consumable Parts | CP1200BP - Battery 12V 1.5Ah, CP1200BP3 - Battery 12V 3Ah, CP1200BP4 - Battery 12V 4Ah (not included) |
| Collet nut | 11mm |
|---|---|
| No load speed | 15000-35000r/min |
| Power | 135W |
| Voltage | 230V |
| Battery system | D20 20V Li-ion |
|---|---|
| Batteries per item | Sold separately |
| Charger type | Sold separately |
| Oscillating angle | 3° |
| No load speed | 500-15,000o/m |
| Voltage | 230V |
|---|---|
| Power output | 300W |
| No load speed | 1500-22000rpm |
| Cable length | 2m |
| Weight | 1.3kg |
| No Load Speed | 35000rpm |
|---|---|
| Supplied In Case | Yes |
| Voltage | 230V |
| Wattage | 180W |
| Weight | 0.7kg |
| Voltage | 20V |
|---|---|
| No load speed | 5,000-34,000rpm |
| Flexible shaft length | 910mm |
| Chuck size | 3.2mm |
| Run time | 50 mins (2.0Ah Li-ion battery) and 120min (4.0Ah Li-ion battery) |
| Model No | E540 |
|---|---|
| Brand | Sealey |
| Collets | 2.3, 3mm |
| Contents | Sanding Bands (x4), Sanding Discs (x3), Cutting Discs (x8), Polishing Wheels (x4), Dressing Stone, Spanner, Flexible Rotary Shaft |
| Diamond Tipped Engravers | 2 |
| Model No | CP108VMG |
|---|---|
| Brand | Sealey |
| Collets | 1mm (x1), 1.7mm (x1), 2mm (x1), 2.4mm (x1), 3.2mm (x1) |
| Contents | Accessories; HSS Drill Bits (x6), Mandrels as Tool Holders (x2), Polishing Discs (x3), Grinding Discs (x4), Metal Brush (x1), Cutting Discs (x16), Collect Chucks (x5), Synthetic Brushes (x2), Milling Bits (x3), Engraving Bits (x2) , Grinding Bits (x5), Combination Spanner (x1) |
| Free Speed | 5000-25000rpm |
| Model No | CP108VMTBO |
|---|---|
| Accessories | Sanding paper, backing pad, scraper, cutting blade |
| Battery | 10.8V 2-4Ah Lithium-ion (not included) |
| Brand | Sealey |
| Nett Weight | 0.98kg |
| Model No | SMT300Q |
|---|---|
| Accessories | Cutting Blade, Scraper Blade, Sanding Discs (x4), Triangle Backing Pad |
| Brand | Sealey |
| Motor Power | 300W |
| Nett Weight | 1.48kg |
| Model No | E5188 |
|---|---|
| Brand | Sealey |
| Collets | 1.5mm, 2.3mm (x2), 3.2mm |
| Contents | Sanding Bands (x12), Grinding Wheels (x12), Felt Wheels (x6), Cut-Off Wheels (x35), Cut-Off Wheel Heavy-Duty (x30), Sanding Disc 180Grit (x36), Sanding Disc 320Grit (x36), Steel Wire Brush (x3), Brass Wire Brush (x3), Nylon End Brush, Fibreglass Cut-Off Wheels (x5), Cloth Wheel, Rubber Emery Wheel, Flap Wheel, Dressing Stone, Flexible Rotary Shaft, Spanner, Spindle Lock Key, Polishing Compound, Selection of Drill Bits, Mandrels (x4) |
| Diamond Tipped Engravers | 5pc |
| Model No | CP20VMT |
|---|---|
| Accessories | Sanding Pads, Backing Pad, Scraper, Segment Saw Blade, Plunge Saw Blade |
| Battery | 20V 2Ah - 6Ah Lithium-ion (not included) |
| Brand | Sealey |
| Consumable Parts | CP20VBP2 - 2Ah Battery, CP20VBP4 - 4Ah Battery, CP20VBP6 - 6Ah Battery |
| Model No | CP20VMTKIT |
|---|---|
| Brand | Sealey |
| Voltage | 4V (1.5Ah battery) |
|---|---|
| Max. torque | 4.0Nm |
| No-load speed | 200rpm |
| Drive | 1/4 Hex |
| Weight (bare tool) | 0.96kg |
| Product Number | RG10028 |
|---|---|
| Type | RG Tools 20V Multi-Tool |
| Pack quantity | 1 pieces |
| Voltage | 10.8V |
|---|---|
| No-load speed | 5,000–16,000rpm |
| Speed settings | 6 |
| Oscillation | 3° |
| Pad Size | 90 x 90 x 90mm |
| Battery | 20V Storm Force® Li-ion |
|---|---|
| Batteries per Item | Sold separately |
| Charger Type | Sold separately |
| No Load Speed | 5000 - 20,000rpm |
| Supplied In Case | No |
| Battery | D20 20V Li-ion |
|---|---|
| Batteries per Item | 1x 2.0Ah |
| Charger Type | 1.65A |
| No Load Speed | 500-15000rpm |
| Supplied In Case | Yes |
| Battery | 20V Storm Force Li-ion |
|---|---|
| No load speed | 5000-20000 (6 speed)opm |
| Sound level pressure | 96.7dB(A)+/-3 |
| Sound level power | 107.8dB(A)+/-3 |
| Vibration level | 11.92m/s2 +/-1.5m/s2 |
| Product Number | RG10025 |
|---|---|
| Type | RG Tools 20V Multi-Tool |
| Size | 2 x 5 |
| Pack quantity | 1 pieces |
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
