
Save Extra With 1 Offer
A. The ETX14-BS is a 12V battery with a 12Ah capacity rated at the C20 discharge rate and a cold cranking amperage of 200A measured to EN standard.
A. The ETX14-BS uses Absorbent Glass Mat (AGM) technology, in which the electrolyte is held within a glass fibre separator rather than as free liquid. This makes the battery sealed, spill-proof, vibration-resistant, and suitable for motorcycles where orientation may vary.
A. Yes. Once the initial acid filling has been carried out prior to first use, no further electrolyte maintenance is required throughout the service life of the battery.
A. The ETX14-BS carries polarity code 1. Purchasers should verify terminal position against their vehicle's battery tray orientation before fitting.
A. Exide's AGM technology is capable of supporting start-stop applications; however, compatibility with a specific vehicle's start-stop system should be confirmed against the product label and OEM specification before installation.
A. No manufacturer cross-references are currently listed for this SKU. Fitment should be verified using the battery dimensions, voltage, capacity, and polarity data against the vehicle's OEM requirements.
A. Related variants include the ETX12-BS, ETX14AH-BS, ETX14AHL-BS, ET12A-BS, ET12B-BS, ET14B-BS, ET4B-BS, ET7B-BS, ET9B-BS, and ETR4A-BS, covering a range of capacities and case sizes within the same AGM motorcycle battery family.
A. The ETX14-BS is supplied with a 1-year manufacturer warranty covering defects in materials and workmanship under normal use conditions.
A. The battery measures 150mm (length) × 90mm (width) × 145mm (height including terminal). It weighs 4.5kg. The case reference is C56 and the hold-down classification is B00.
By sharing your email, you agree to our privacy policy & terms of service