
Save Extra With 1 Offer
A. EFB stands for Enhanced Flooded Battery. Compared with a conventional flooded lead-acid battery, an EFB incorporates a polyester scrim bonded to the positive plate to improve active material retention. This construction increases cycle life and maintains charge acceptance more effectively under the repeated shallow-cycling conditions created by Start-Stop systems.
A. Yes. The DL600 is purpose-built for Start-Stop applications. Its EFB chemistry supports the high cycling and rapid energy recovery demands associated with regenerative braking and engine auto-restart events. It is also suitable as a direct replacement in vehicles without Start-Stop functionality.
A. The DL600 carries polarity code 0, which denotes a standard positive-left terminal arrangement when viewed from the front of the battery. Confirm that this layout matches your vehicle's battery tray and cable routing before installation.
A. The DL600 is designed to fit any vehicle specifying a Type 027EFB battery. This covers a broad range of European passenger cars. For precise fitment confirmation, cross-reference the 027EFB type code against your vehicle handbook or use a vehicle registration lookup tool.
A. Batteries in the same fitment and specification class include the Bosch S4 E05 (027 EFB, 60Ah), the Exide EL600 (027 EFB, 60Ah), and the Yuasa YBX7027. All share the 027EFB fitment group, though individual CCA ratings and dimensions may vary slightly between brands.
A. The DL600 is supplied with a 3-year manufacturer's warranty. The warranty covers defects in materials and workmanship under normal use conditions. It does not cover damage resulting from incorrect fitment, insufficient charging, or use in applications for which the battery is not rated.
A. The DL600 weighs 17 kg. As with all lead-acid batteries, it should be handled with care to avoid tilting beyond 45 degrees. Protective gloves and eye protection are recommended during installation. The battery is dispatched fully charged and ready for fitment.
A. The DL600 is dispatched via standard parcel delivery and arrives within 1–3 working days to UK mainland addresses. A 30-day returns policy applies. Returns must be arranged within 30 days of receipt; the battery must be unused and in its original condition. Contact the PartsForMachines customer service team to initiate a return.
A. The DL600 measures 242 mm (length) × 175 mm (width) × 190 mm (height including terminal) and is classified as a Type 027EFB fitment. It is housed in an L02 case and uses a B13 hold-down configuration. Always verify dimensions against your vehicle's battery tray before ordering.
A. The DL600 is rated at 640A CCA measured to the EN standard. This figure represents the current the battery can deliver at −18°C for 30 seconds whilst maintaining a terminal voltage above 7.5V, and indicates the battery's ability to start an engine under cold-weather conditions.
By sharing your email, you agree to our privacy policy & terms of service