Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Product Number: 35036
The Draper 35036 oxy-acetylene. A selection of used with traditional shank or welding mixers. Product Key Feature:A selection of used with traditional shank or welding mixersContents:1 x No. 3 Swaged Heavy Duty Nozzle for Oxy-Acetylene Welding. Compatible across the draper welding range — check product specifications for exact model fit. When ordering, search under oxy acetylene equipment or flashback arrestor for this and compatible alternatives.
Additional Information:
A selection of used with traditional shank or welding mixers.
Product Key Feature:About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Welding No.2 Swaged Heavy Duty Nozzle for Oxy-Acetylene Welding, 35035, Draper
£13.54
£13.27
2% OFF
|
||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 35105 | 35035 | 09070 | 09080 | 15051 |
A. The Draper 35036 is an oxy-acetylene welding torch set for welding, brazing, cutting (with a cutting attachment), and heating of steel and other ferrous metals.
A. Essential safety equipment: flashback arrestors on both oxygen and acetylene hoses (fit close to the torch), compatible regulators for each gas, certified hoses, shade 5 welding goggles or a welding mask for cutting/welding, and fire-resistant clothing. Never use oxy-acetylene without flashback arrestors.
A. A flashback is when the flame burns back inside the hose and torch, potentially reaching the cylinder. Causes: blocked nozzle, hoses touching the work, incorrect pressures, or overheated torch. Prevention: always use flashback arrestors on both hoses, use correct gas pressures, keep nozzles clean, and purge hoses before lighting.
A. A neutral flame (equal oxygen and acetylene) is used for most welding — the inner cone is clearly defined with no excess feather. A reducing (carburising) flame has excess acetylene (used for hard-facing). An oxidising flame has excess oxygen (used for some brazing). Adjust valves slowly from a reducing flame to neutral.
A. Nozzle size is selected by material thickness — smaller numbers for thin sheet, larger for heavy sections. The full range of compatible nozzles (including cutting, welding, and heating nozzles) is in the Oxy-Acetylene Consumables section.
A. To light: open acetylene slightly, ignite with a friction lighter (never matches), increase acetylene to remove smoke, add oxygen to reach the required flame. To shut down: close the oxygen valve first, then the acetylene — this prevents soot deposition in the nozzle.
A. Propane can be used for heating and cutting (with a propane cutting nozzle) but not for welding — propane produces an oxidising flame that cannot create the neutral or reducing flame required for fusion welding. Propane cutting nozzles and regulators differ from acetylene types.
A. Store cylinders upright, secured against tipping. Store oxygen and acetylene separately or with at least 3m between them. Keep away from heat sources and flammable materials. Never store with regulators fitted when not in use. Cylinders must meet local regulations on storage quantity.
A. MIG tips and nozzles are torch-specific. Check your machine's torch type — common types include MB14, MB15, MB25, and MB36. The contact tip thread size must match your torch body. The tip bore size must match your wire diameter. Using the wrong tip or nozzle will cause poor wire feed and inconsistent welds.
A. Yes — UK stocked for fast despatch. Check availability at PartsForMachines.com. Orders placed before the daily cut-off are dispatched same or next working day. Check the product page for current delivery estimates.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
