Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £5.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.99 | 7 to 10 working days |
Product Number: 40928
Guiding a diamond core bit accurately through masonry demands a pilot drill that can withstand the same demanding conditions. The Draper 40928 TCT Tapered Guide Drill is designed specifically for use with diamond core drill bits, providing the precise centre point needed to keep a core bit on course during masonry drilling operations. The 10 x 200mm drill bit is tungsten carbide tipped (TCT), making it suited to working on masonry materials. The tip is attached via a brazed connection, and the drill angle is set at 135°. The body is made from hardened and tempered steel to improve strength and durability throughout its working life. The bit features a round shank and is compatible with all 1/2" BSP threaded arbors, making it straightforward to pair with a wide range of diamond core drill setups. Weighing 85g and measuring 10mm in diameter with a 200mm length, it is a precision consumable rather than a general-purpose masonry bit. It must not be used in hammer mode; it is intended for rotary drilling only in conjunction with diamond core bits. Supplied as a single TCT tapered drill bit (10 x 200mm), this Draper consumable is catalogued under the Diamond Core Bit category and is a practical addition to any professional core drilling kit where accurate pilot drilling is required.
Designed for use with diamond core drill bits. This 10 x 200mm tapered drill bit is tungsten carbide tipped (TCT) for working on masonry materials. Made from hardened and tempered steel to improve strength and durability. It is compatible with all 1/2" BSP threaded arbors. It should not be used in hammer mode.
Product Key Feature:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1-3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Diameter | 10mm |
|---|---|
| Length | 200mm |
| Connection | Round shank |
| Drill angle | 135° |
| Tip connection | Brazed |
| Weight | 85g |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £5.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||||||||||||
| Technical Specification | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 69356 | 00077 | 03643 | 02764 | 03775 | 03782 | 03786 | 03794 | 02899 | 00993 | 03147 | 03820 | 02218 | 02224 | 02248 |
| Type | Bench Stand | Spare Part | Board | Hose | Bolt | Nut | Washer | Screw | Spare Part | Base | Handle | Washer | Cap | Guard | Roller |
A. The Draper 40928 TCT Tapered Guide Drill is designed specifically for use with diamond core drill bits. It acts as a guide drill to locate and pilot the core bit accurately during masonry drilling operations.
A. The Draper 40928 is compatible with all 1/2" BSP threaded arbors, making it suitable for use with a wide range of diamond core drill assemblies.
A. No. This drill bit must not be used in hammer mode. It is intended for rotary drilling only when used in conjunction with diamond core bits.
A. The bit is made from hardened and tempered steel for improved strength and durability. It is tungsten carbide tipped (TCT), suited to working on masonry materials, with the tip attached via a brazed connection.
A. The drill bit has a diameter of 10mm and a length of 200mm. The drill angle is 135°, the shank is round, and the tip connection is brazed. The unit weighs 85g.
A. The product is supplied as a single TCT Tapered Drill Bit measuring 10 x 200mm.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
