Draper Lathe, Saw & Machine Parts by Code

find the right

Parts & Spares

Shop by Sub Category

From the parts list: the machine's manual numbers every part on its exploded diagram, and that code typed into search finds it here. No manual to hand means the Stock Number and a photo over WhatsApp, and the code comes back from the list.

The lathe internals run through this shelf, collets, chucks, shanks, guards and boards among 2,795 coded lines, each found by its parts list number.

PC boards, potentiometers and switches are coded parts here like any other, so the board's number from the parts list replaces the electronics without replacing the machine.

Yes, guards, locking pins and caps are individually coded, and a machine that has lost its guard is made whole rather than run without.

Because the parts list names them: a rebuild wants the exact M14 bolt or M12 washer the diagram shows, and the coded fixing removes the guesswork a hardware drawer invites.

The parts list code is machine specific by nature, and the Compatible tab confirms it, so the code that came from your machine's manual is already the fit.

Clear

This is the deepest shelf in the Draper estate, 2,795 machine tool parts, and it works by one method from end to end: the parts list code. Every Draper machine's manual carries an exploded diagram where each part wears a number, and that number typed into search lands on the part, from a collet to an M12 washer.

The shelf holds machines whole, piece by piece. The cutting side runs collets, supporting shanks, chucks and active guards for the working edge. The control side carries PC boards, potentiometers, switches and handles for the machine's hands and brain. The muscle includes hydraulic cylinders and locking pins for the frames and presses, and between them sit the honest fixings, hex bolts, nuts, split and flat washers by size, all listed individually because a machine rebuild needs the exact bolt as much as the exact board, and the parts list names both.

The method matters more than browsing at this depth: two and a half thousand coded lines are found by number, not scrolled. The Stock Number identifies the machine, the parts list names the piece within it, and where a manual has gone missing over the years, the Stock Number with a photo of the old part over WhatsApp on 07754288583 recovers the code from the machine's own list and comes back with the part named.

A machine tool that has stopped mid life usually needs one coded piece, a board, a guard, a locking pin, and this shelf exists precisely so that piece can be bought alone against its code. The Compatible tab confirms each part against its machines, and machine model pages list the confirmed parts from the machine side.