Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £4.99 | 2 to 3 working days |
| Next Day | £17.95 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £29.94 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £20.34 | 7 to 10 working days |
Product Number: 57624
The Draper 57624 spot weld cutter. Set of two spot weld cutters to drill out welds on body panels. Pilot drill ensures accurate cut. Cutters screw onto hexagon shank and are reversible for extra long life. Compatible across the draper welding range — check product specifications for exact model fit. Also known as spot weld drill or panel removal in welding supplies catalogues.
Additional Information:
Set of two spot weld cutters to drill out welds on body panels. Pilot drill ensures accurate cut. Cutters screw onto hexagon shank and are reversible for extra long life. Shank size 7mm.
Product Key Feature:About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £4.99
Next Day Delivery Available
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||||||||||||
| Technical Specification | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRODUCT NUMBER | 03155 | 10572 | 10573 | 14037 | 18549 | 18551 | 19234 | 19235 | 31498 | 31503 | 31950 | 43706 | 43708 | 43709 | 43710 |
| Type | Flat Wood Bit | Countersink | Countersink | Drill Bit | Titanium-Coated Drill Bit | Masonry Drill Bit | Countersink | Countersink | Tile Drill Bit | Tile Drill Bit | Drill Bit | Diamond Core Drill Bit | Diamond Core Drill Bit | Diamond Core Drill Bit | Diamond Core Drill Bit |
| Length | 330mm | 170mm | |||||||||||||
| Size | 12mm | 12mm | 16mm | 35mm | 12mm | 16mm | 3mm | 4mm | 20mm | 200mm | 40mm | 30mm | 170mm | ||
| Diameter | 28mm | 38mm | |||||||||||||
| Diameter Range | 26-50mm | 26-50mm | |||||||||||||
| Format | Set | ||||||||||||||
| Length Range | Over 200mm | 101-200mm | |||||||||||||
| Pack Qty | 15 | 17 | |||||||||||||
| Size Range | 11-25mm | 11-25mm | 11-25mm | 26-50mm | 11-25mm | 11-25mm | Up to 10mm | Up to 10mm | 11-25mm | 101-200mm | 26-50mm | 26-50mm | 101-200mm | ||
| Suitable For | Wood | Masonry | Tile | Tile | Wood | ||||||||||
| Show More | |||||||||||||||
A. The Draper 57624 is a drill bit cutter for removing resistance spot welds during automotive panel replacement. It drills through the outer panel at the weld nugget, separating the panels without cutting through both layers.
A. The Draper 57624 is used in a standard electric drill or drill press. Check the shank size in the Technical Specifications for the correct collet or chuck size.
A. Use moderate speed and light pressure — too fast overheats the cutter; too much pressure breaks the crown tip. Apply cutting fluid or lubricant to extend cutter life and maintain a clean cut.
A. Spot weld cutters can be reused until the cutting crown shows wear or the cut quality deteriorates. Replace when the cutter produces ragged cuts or shows visible wear.
A. Larger diameter cutters suit larger weld nuggets (heavier gauge steel and structural panels). Smaller cutters suit thin body panel spot welds. Using a cutter too small leaves weld material behind; too large removes more base metal than necessary.
A. Yes — a centre punch mark at the weld spot prevents the cutter from wandering across the panel surface. Start drilling slowly to ensure the cutter tracks correctly.
A. After cutting through the outer panel at each weld spot, use a panel splitter or flat chisel to separate the panels. Work carefully to avoid damaging the inner panel.
A. Yes — UK stocked for fast despatch. Check availability at PartsForMachines.com. Stock levels are updated in real time on the product page. If the item shows as in stock, it is available for immediate dispatch. For bulk orders or trade quantities, contact customer service for availability and lead times.
A. At minimum you need a welding helmet or headshield (auto-darkening recommended), leather welding gauntlets, a fire-resistant apron or jacket, and steel-toe boots. For enclosed spaces, a fume extractor or respirator is essential. A welding curtain or screen protects bystanders from UV flash. Keep a fire extinguisher accessible.
A. Wear eye protection — cutting dislodges sharp steel swarf. Use gloves. Ensure panels are secure and supported before drilling. Keep the drill at moderate speed to maintain control.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
