Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: PCSH16BG
Machinery shakes; pipes and looms shouldn't. The clip between them does the absorbing.
Sized at 16mm closed diameter with a 6.6mm hole for an M6 bolt, the PCSH16BG fixes pipes, hoses and cables to panels, frames and structures. Its TPE160 high-temperature liner - rated -50C to +160C - cushions the line against vibration and chafe and resists UV and ozone, while the ribbed band sits flush to the surface it is bolted to. Nuts and bolts are not included.
In 304 stainless (18/8, EN 1.4301), this is the version for runs that live outside or around moisture - the liner shrugs off UV and ozone, and the band will not rust where a plated clip eventually would. Dimensions are identical to the zinc version, so the mounting interchange is direct. With the TPE160 liner rated to +160C, it is the version to specify where heat builds - engine compartments, exhaust-adjacent runs and hot plant.
Also available - the standard liner version (PCSR16BG); the zinc plated version (PCZH16BG); the 13mm size (PCSH13BG); the 19mm size (PCSH19BG).
Designed, manufactured and tested in-house at Sudbury, Suffolk under ISO 9001:2015, with over 180 years of British manufacturing behind it.
| Closed Diameter | 16mm (approx 5/8 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | 304 stainless steel 18/8 (EN 1.4301, BS304) |
| Liner | TPE160 high-temperature liner (-50C to +160C), UV and ozone resistant |
| Overall Height (A) | 12mm |
| Leg/Base Length (B) | 21mm |
| Material Thickness (C) | 0.9mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | PCSR16BG | PCZH16BG | PCSH13BG | PCSH19BG |
| Material | Stainless steel | Mild steel zinc plated | Stainless steel | Stainless steel |
| Clip Type | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 16mm | 16mm | 13mm | 19mm |
| Fixing Thread | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
A. P-clips are sized by closed diameter, and this one closes at 16mm - so it suits a pipe, hose or cable with a 16mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request. That is approximately 5/8 in, if you work in imperial.
A. The TPE160 high-temperature liner absorbs vibration and prevents chafing of the item being clamped. It is UV and ozone resistant and rated for service from -50C to +160C.
A. The liner is UV and ozone resistant, so sunlight does not degrade it, and the band comes in zinc plated or 304 stainless for outdoor duty - stainless where it stays wet. Size the clip to the outside diameter of the tube or pipe being fixed.
A. Yes - the design brief covers pipes, hoses and cables alike. The liner cushions the sheath against chafe and vibration, which matters as much on an armoured cable or air line as on a coolant hose. Size by outside diameter.
A. A hose clip makes a joint seal; a P-clip makes a run stay put. If the problem is a leak at a fitting, you want a hose clip - if the problem is a line that moves, chafes or rattles, you want this.
A. Yes - the band has a strengthening rib designed to keep the clip flush with the surface it is bolted to.
A. This is a pack of 25 clips, all 16mm closed diameter.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
