Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS25BP
Large-diameter wet-side hoses - pump deliveries, drainage runs, washdown mains - need clips that stay serviceable for years, not seasons.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGS25BP adds the JCS details that make that reliable - a 17-25mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 5.0 Nm (45 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The bulk box of 10 puts one corrosion-proof specification across the whole site - every component 18/8 (EN 1.4301) 304 stainless, salt mist tested, with Lloyd's Register Type Approval for marine, offshore and industrial service. JCS stainless clips are used across pumping, stormwater, wastewater treatment and irrigation plant.
Also available - the same clip as a retail carton (HGS25RP); the same clip as a 5-pack (HGS25PM1); the 13-20mm size (HGS20BP); the 22-30mm size (HGS30BP).
Lloyd's Register Type Approval on a stocked bulk pack is rare at any price point.
JCS recommends letting the application decide - what the hose carries, the temperature and pressure it sees, and how corrosive the environment is - then matching the clip's adjustment range to the fitted hose diameter.
| Adjustment Range | 17-25mm (approx 11/16 - 1 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS25RP | HGS25PM1 | HGS20BP | HGS30BP |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 17-25mm | 17-25mm | 13-20mm | 22-30mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 |
| Pack Qty | 10 | 5 | 10 | 10 |
A. This size spans 17-25mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 17-25mm and the HGS25BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 11/16 to 1 in, covering common 3/4 and 7/8 in hose sizes.
A. For this size band JCS publishes a recommended torque of 5.0 Nm (45 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 17-25mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
