Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ16BP
Buying hose clips at bulk quantity is a bet on consistency - every clip in the box has to seat, bite and hold the same as the last.
Sized to adjust between 11-16mm, the HGZ16BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 3.0 Nm (26 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Boxed as 10 clips for stores and production use, it carries JCS's general purpose specification - electro zinc plated and passivated mild steel tested to EN9227. JCS supplies leading agricultural machinery manufacturers, and the same clips serve workshop, fleet and light industrial pipework. Size each joint by the fitted outside diameter of the hose.
Also available - the same clip as a retail carton (HGZ16RP); the same clip as a 5-pack (HGZ16PM1); the 9.5-12mm size (HGZ12BP); the 13-20mm size (HGZ20BP).
Designed, made and batch-tested in-house at Sudbury, Suffolk under ISO 9001:2015 - an everyday clip built to an approval list most premium clips cannot match.
| Adjustment Range | 11-16mm (approx 7/16 - 5/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 3.0 Nm (26 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ16RP | HGZ16PM1 | HGZ12BP | HGZ20BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 11-16mm | 11-16mm | 9.5-12mm | 13-20mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Pack Qty | 10 | 5 | 15 | 10 |
A. It adjusts between 11-16mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 11-16mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 7/16 to 5/8 in, covering common 1/2 and 5/8 in hose sizes.
A. For this size band JCS publishes a recommended torque of 3.0 Nm (26 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS electro zinc plates and passivates the mild steel band after it is cut to size, so even the cut edges carry coating - and the finish is tested to EN9227. That suits dry and general duty; once salt or standing moisture is involved, the stainless range is the correct specification.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. The screw is cold-headed and work-hardened with a sharply defined hexagon and rolled threads to resist slipping and rounding. For high-vibration applications JCS recommends rechecking the clip after use to maintain seal integrity.
A. This is a pack of 10 clips, all 11-16mm adjustment range. Other pack formats of the same clip are listed separately.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
