Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS35PM2
Variations
Outdoors, in washdown bays or anywhere salt and moisture linger, an ordinary plated clip corrodes and seizes long before the hose it holds fails.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGS35PM2 adds the JCS details that make that reliable - a 25-35mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 5.0 Nm (45 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
The specification is 18/8 (EN 1.4301) stainless throughout - band, housing and screw - carrying Lloyd's Register Type Approval and suited to salt water and other highly corrosive environments. The same clips serve agricultural irrigation, washdown plant and drainage systems. Measure the hose's fitted outside diameter and pick the range that covers it.
Also available - the same clip in a 5-pack (HGS35PM1); the 22-30mm size (HGS30PM2); a zinc plated version of the same size and pack (HGZ35PM2).
All-stainless construction verified by salt mist testing - made and batch-tested in-house in Sudbury, Suffolk under ISO 9001:2015.
| Adjustment Range | 25-35mm (approx 1 - 1 3/8 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Hose Clip 25-35mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS35PM1 (5 Pack)
£10.73
£10.42
3% OFF
|
Hose Clip 22-30mm, 304 Stainless Steel Worm Drive - JCS Hi-Grip HGS30PM2 (10 Pack)
£17.65
£17.14
3% OFF
|
|
| Technical Specification | |||
|---|---|---|---|
| PRODUCT NUMBER | HGS35PM1 | HGS30PM2 | HGZ35PM2 |
| Material | Stainless steel | Stainless steel | Mild steel zinc plated |
| Clamping Range | 25-35mm | 22-30mm | 25-35mm |
| Clip Type | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size |
| Grade | 304 | 304 | |
| Pack Qty | 5 | 10 | 10 |
A. This size spans 25-35mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 25-35mm and the HGS35PM2 is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 1 to 1 3/8 in, covering common 1 and 1 1/4 in hose sizes.
A. For this size band JCS publishes a recommended torque of 5.0 Nm (45 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. No mixed metals here - band, housing and screw are all the same stainless grade, and JCS verifies that through salt mist testing. Cheaper clips often pair a stainless band with a plated screw, which is the part that fails first.
A. Yes - JCS stainless hose clips are used across water and drainage infrastructure, including pumping solutions, stormwater and overflow management, wastewater treatment and agricultural irrigation networks.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 25-35mm adjustment range. Other pack formats of the same clip are listed separately.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
