Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGS25RP
Where a seized, rusted clip means cutting the joint apart, specifying stainless from the start pays for itself at the first service.
This is the 17-25mm size of the Hi-Grip worm drive range. Where cheaper clips cut their threads and leave sharp band edges, JCS rolls the screw threads for strength and fully rounds the band edges so the hose is protected as the clip bites. JCS publishes a recommended torque of 5.0 Nm (45 lb-in) for this size - seat the clip centrally on the barb and work up to it gradually. Hi-Grip exceeds BS5315 and holds BSI Kitemark and NATO approvals.
Packed as a carton of 10 for the counter and the toolbox, it carries the full stainless specification - every component 18/8 (EN 1.4301) stainless steel with Lloyd's Register Type Approval - for hose joints in wet, corrosive and saltwater service from boats to washdown bays.
Also available - the same clip as a bulk pack (HGS25BP); the same clip as a 5-pack (HGS25PM1); the 14-22mm size (HGS22RP); the 22-30mm size (HGS30RP).
All-stainless construction verified by salt mist testing - made and batch-tested in-house in Sudbury, Suffolk under ISO 9001:2015.
| Adjustment Range | 17-25mm (approx 11/16 - 1 in) |
|---|---|
| Material | 304 stainless steel 18/8 (EN 1.4301), all components stainless |
| Type | Worm drive |
| Recommended Torque | 5.0 Nm (45 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Approval | Lloyd's Register Type Approval (marine, offshore, industrial) |
| Applications | Marine, offshore & industrial (Lloyd's Register Type Approved); pumping, stormwater & wastewater systems; agricultural irrigation networks (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGS25BP | HGS25PM1 | HGS22RP | HGS30RP |
| Material | Stainless steel | Stainless steel | Stainless steel | Stainless steel |
| Clamping Range | 17-25mm | 17-25mm | 14-22mm | 22-30mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | 304 |
| Pack Qty | 10 | 5 | 10 | 10 |
A. It adjusts between 17-25mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 17-25mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 11/16 to 1 in, covering common 3/4 and 7/8 in hose sizes.
A. JCS recommends 5.0 Nm (45 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. Yes - every component is the same grade of stainless steel, verified through JCS's salt mist testing, so there is no mixed-metal weak point to corrode first.
A. That is one of their core applications: JCS stainless clips serve temporary and permanent pumping, stormwater and overflow systems, wastewater treatment works, and agricultural irrigation networks, where corrosion resistance decides service life.
A. For most marine and wet industrial duty, this 304 (18/8) clip with its Lloyd's Register Type Approval is the standard answer. JCS reserves its 316 grade for the most demanding settings - offshore, food and pharmaceutical - so if that is your application, ask us about options.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 17-25mm adjustment range. Other pack formats of the same clip are listed separately.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
