Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ50RP
A hose that weeps at the joint wastes fluid, invites grime and eventually strands the machine it serves.
Worm drive clips seal by drawing the band evenly through a captive screw housing, and the HGZ50RP adds the JCS details that make that reliable - a 35-50mm adjustment span, a cold-headed, work-hardened hex screw with rolled threads that will not round off, and fully rounded band edges. Recommended tightening torque for this size is 6.0 Nm (54 lb-in). Manufactured to exceed BS5315, Kitemarked and NATO approved.
This 10-pack format is the trade quantity - workshop stores, service vans and maintenance teams fitting the same sizes repeatedly. The specification is unchanged: heavily electro zinc plated and passivated mild steel tested to EN9227, plated after cutting so the band edges are coated, intended for non-corrosive domestic, automotive and industrial duty.
Also available - the same clip as a trade bag (HGZ50BG); the same clip as a bulk pack (HGZ50BP); the 35-45mm size (HGZ45RP); the 40-55mm size (HGZ55RP).
Designed, made and batch-tested in-house at Sudbury, Suffolk under ISO 9001:2015 - an everyday clip built to an approval list most premium clips cannot match.
| Adjustment Range | 35-50mm (approx 1 3/8 - 1 15/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ50BG | HGZ50BP | HGZ45RP | HGZ55RP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 35-50mm | 35-50mm | 35-45mm | 40-55mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Pack Qty | 5 | 10 | 10 | 10 |
A. It adjusts between 35-50mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 35-50mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps. In imperial terms that is roughly 1 3/8 to 1 15/16 in, covering common 1 1/2 and 1 3/4 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. JCS electro zinc plates and passivates the mild steel band after it is cut to size, so even the cut edges carry coating - and the finish is tested to EN9227. That suits dry and general duty; once salt or standing moisture is involved, the stainless range is the correct specification.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 35-50mm adjustment range. Other pack formats of the same clip are listed separately.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
