Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ220BP
Buying hose clips at bulk quantity is a bet on consistency - every clip in the box has to seat, bite and hold the same as the last.
Sized to adjust between 190-220mm, the HGZ220BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Boxed as 10 clips for stores and production use, it carries JCS's general purpose specification - electro zinc plated and passivated mild steel tested to EN9227. JCS supplies leading agricultural machinery manufacturers, and the same clips serve workshop, fleet and light industrial pipework. Size each joint by the fitted outside diameter of the hose.
Also available - the 170-200mm size (HGZ200BP); the 210-240mm size (HGZ240BP); a 304 stainless version in the same size and pack (HGS220BP).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 190-220mm (approx 7 1/2 - 8 11/16 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||
| Technical Specification | |||
|---|---|---|---|
| PRODUCT NUMBER | HGZ200BP | HGZ240BP | HGS220BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Stainless steel |
| Clamping Range | 170-200mm | 210-240mm | 190-220mm |
| Clip Type | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size |
| Grade | 304 | ||
| Pack Qty | 10 | 10 | 10 |
A. It adjusts between 190-220mm. Measure the outside diameter of your hose when fitted over its pipe or fitting - if that measurement falls within 190-220mm, this clip fits. JCS clips offer a larger adjustment range per size than typical nut-and-bolt clamps.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. No - JCS itself cautions that zinc-coated clamps can quickly corrode or seize around salt water. The marine specification is Hi-Grip Stainless: 18/8 304 stainless throughout, with Lloyd's Register Type Approval.
A. Anywhere a flexible hose seals onto a rigid fitting in dry or general conditions - vehicles, garden and grounds machinery, air lines, workshop and light industrial pipework. JCS supplies the automotive sector and leading agricultural machinery manufacturers.
A. Start from the application, as JCS's own guidance does: what the hose carries, the temperature and pressure involved, and whether the environment is corrosive. Dry, general duty points to this zinc plated clip; wet, salty or chemical exposure points to the stainless range. Then size by the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 190-220mm adjustment range. Other pack formats of the same clip are listed separately.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
