Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ140BP
For workshops standardising on one clip brand across the fleet, batch consistency matters as much as the clip itself.
Sized to adjust between 110-140mm, the HGZ140BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Boxed as 10 clips for stores and production use, it carries JCS's general purpose specification - electro zinc plated and passivated mild steel tested to EN9227. JCS supplies leading agricultural machinery manufacturers, and the same clips serve workshop, fleet and light industrial pipework. Size each joint by the fitted outside diameter of the hose.
Also available - the same clip as a trade bag (HGZ140BG); the 90-120mm size (HGZ120BP); the 130-160mm size (HGZ160BP); a 304 stainless version in the same size and pack (HGS140BP).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
| Adjustment Range | 110-140mm (approx 4 5/16 - 5 1/2 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 10 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | HGZ140BG | HGZ120BP | HGZ160BP | HGS140BP |
| Material | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Stainless steel |
| Clamping Range | 110-140mm | 90-120mm | 130-160mm | 110-140mm |
| Clip Type | Worm drive | Worm drive | Worm drive | Worm drive |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | |||
| Pack Qty | 10 | 10 | 10 | 10 |
A. This size spans 110-140mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 110-140mm and the HGZ140BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps. In imperial terms that is roughly 4 5/16 to 5 1/2 in, covering common 4 1/2 and 5 in hose sizes.
A. JCS recommends 6.0 Nm (54 lb-in) for this size. Position the clip centrally over the hose barb and tighten incrementally to that torque - over-tightening can damage the hose.
A. No - JCS itself cautions that zinc-coated clamps can quickly corrode or seize around salt water. The marine specification is Hi-Grip Stainless: 18/8 304 stainless throughout, with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. JCS recommends asking three questions: what is the hose carrying (water, fuel, chemicals, air)? What pressure and temperature will it see? And is the environment corrosive? The answers drive material choice - zinc plated for general non-corrosive use, stainless for corrosive environments - then match the clip's range to the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 10 clips, all 110-140mm adjustment range. Other pack formats of the same clip are listed separately.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
