Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Pressure Washer

Start Now

Shop by Sub Category

Brands

FAQs

Because heat releases grease, oil and baked-on soil in a way pressure alone does not. A hot machine cleans an engine bay or a plant floor faster and with less water than a cold machine at the same pressure.

They are settings on the same machine rather than different machines. Hot water at working pressure handles most degreasing; steam drops the flow and raises the temperature further for the worst deposits and for sanitising.

It varies across the range. 230V machines run from a standard supply and cover mobile work. The 415V stainless bodies reach 200 bar at 15 litres per minute but need three phase in the building, so the supply is confirmed first.

Petrol machines with Honda GX390 electric start engines cover it. They give hot water at full pressure with no electrical supply at all, in static forms for a fixed washdown point.

Because the environments that need hot water are usually wet and corrosive too. Stainless bodies survive washdown duty where a painted frame corrodes, which is why they appear on the industrial mobile machines.

Sealey hold hot water machines at 135 bar and 170 bar on 230V, which suit a workshop that needs heat occasionally rather than a plant running washdown all day.

Clear

Hot Pressure Washers

FilterFilters
View as Grid List

Heat is what a cold machine cannot substitute for. Grease, oil and baked-on soil release with temperature in a way pressure alone will not achieve, which is why a hot machine cleans an engine bay or a food plant floor in a fraction of the time and with less water.

Hot water and steam are two settings, not two machines, but the distinction matters. Hot water at working pressure covers most degreasing. Steam drops the flow and raises the temperature further for the worst deposits and for sanitising. SIP hold Tempest hot water bodies and HDS steam machines, and V-TUF cover both across the RAPID range. SIP hold Tempest bodies at PH480/150, PH540/150 and PH720/150 with HDS steam machines at PH660/120 and PH900/200 above them.

Supply phase is the hard constraint. The 230V machines run from a standard supply and cover mobile work. The 415V stainless bodies reach 200 bar at 15 litres per minute but need three phase in the building. Petrol machines with Honda GX390 electric start remove the electrical question entirely for work with no supply at all.

Stainless construction appears on the washdown machines because the environment that needs hot water is usually also wet and corrosive. Mobile bodies move to the work and static bodies sit at a fixed washdown point. Sealey hold smaller hot machines at 135 and 170 bar in 230V. Questions go over WhatsApp on 07754288583 with the soiling being cleaned. V-TUF RAPID MSH and VSC mobile machines cover the same duty with a stone rest built into the frame.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 7 of 7 entries
FAQs

Because heat releases grease, oil and baked-on soil in a way pressure alone does not. A hot machine cleans an engine bay or a plant floor faster and with less water than a cold machine at the same pressure.

They are settings on the same machine rather than different machines. Hot water at working pressure handles most degreasing; steam drops the flow and raises the temperature further for the worst deposits and for sanitising.

It varies across the range. 230V machines run from a standard supply and cover mobile work. The 415V stainless bodies reach 200 bar at 15 litres per minute but need three phase in the building, so the supply is confirmed first.

Petrol machines with Honda GX390 electric start engines cover it. They give hot water at full pressure with no electrical supply at all, in static forms for a fixed washdown point.

Because the environments that need hot water are usually wet and corrosive too. Stainless bodies survive washdown duty where a painted frame corrodes, which is why they appear on the industrial mobile machines.

Sealey hold hot water machines at 135 bar and 170 bar on 230V, which suit a workshop that needs heat occasionally rather than a plant running washdown all day.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service