Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Because it seizes in its bore and anything applied off centre wedges it harder rather than freeing it. A puller grips the body and draws it out square.

They are system specific, since the injector body shape is what is gripped. Sets cover Citroen, Peugeot and Fiat 2.0 and 2.2HDi 16v, Bosch and Delphi systems, and Mercedes CDi.

Yes. Carbon builds round the seat, and a new injector fitted onto that will not seal. A 38 piece decarbonising brush set clears the bore before anything goes back in.

Restoring the sealing face where brushing is not enough. It cuts the seat true so the injector washer seals against a clean surface rather than a pitted one.

A flow test kit measures delivery and a leak-off test shows which injector is returning more than it should, which identifies the failing one without removing all of them.

An injector seal removal tool at 6.7 to 8.7mm, which takes the washer out without damaging the seat it sits against. A picked-out seal usually takes some of the seat with it.

Clear

Injector Tools

FilterFilters
View as Grid List

A diesel injector seizes into its bore over time, and pulling one is not a matter of leverage. The puller has to grip the injector body itself and draw it out square, because anything applied off centre wedges it harder rather than freeing it. That is also why an injector job is quoted differently from most engine work.

Pullers are listed by injector system rather than by vehicle alone, since the body shape is what has to be gripped. Sets here cover Citroen, Peugeot and Fiat 2.0 and 2.2HDi 16v, Bosch and Delphi systems, and Mercedes CDi. Injector pullers are also rated for the force they apply rather than being general purpose extraction tools.

Once the injector is out, the bore has to be cleaned before anything goes back. Carbon builds round the seat and a new injector fitted onto that will not seal. A 38 piece decarbonising brush set clears the bore, and seat cutters restore the sealing face where brushing is not enough. A lifter and slide hammer set covers injectors that will not move under a steady pull at all.

Flow testing tells you whether an injector is worth refitting rather than replacing, and a leak-off test shows which one is failing. Seal removal tools at 6.7 to 8.7mm take the old washer out without damaging the seat. Send the engine and system to 07754288583 on WhatsApp. Draper hold a 6 piece injector seat cutter set alongside the Sealey bore cleaning range.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 18 of 18 entries
FAQs

Because it seizes in its bore and anything applied off centre wedges it harder rather than freeing it. A puller grips the body and draws it out square.

They are system specific, since the injector body shape is what is gripped. Sets cover Citroen, Peugeot and Fiat 2.0 and 2.2HDi 16v, Bosch and Delphi systems, and Mercedes CDi.

Yes. Carbon builds round the seat, and a new injector fitted onto that will not seal. A 38 piece decarbonising brush set clears the bore before anything goes back in.

Restoring the sealing face where brushing is not enough. It cuts the seat true so the injector washer seals against a clean surface rather than a pitted one.

A flow test kit measures delivery and a leak-off test shows which injector is returning more than it should, which identifies the failing one without removing all of them.

An injector seal removal tool at 6.7 to 8.7mm, which takes the washer out without damaging the seat it sits against. A picked-out seal usually takes some of the seat with it.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service