Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Three search paths: (1) OEM Deutz-Fahr part number — normally stamped on the original starter's body or listed in the Deutz-Fahr parts manual; (2) Deutz engine model — Deutz-Fahr tractors are predominantly Deutz-engined (BF4M, BF6M, TCD3.6, TCD4.1, TCD6.1 series, and older 1011, 2011, 912 series); the engine model is often the most reliable cross-reference; (3) Deutz-Fahr tractor model and year. Photograph the engine data plate if uncertain; WhatsApp 07754288583 with the engine model.

Yes. Deutz engines (under the Deutz AG brand) are widely supplied as standalone engines to plant-equipment manufacturers, specialist-vehicle builders, and industrial-equipment makers across Europe and globally. Common applications: telehandlers, smaller wheel loaders, forklifts, generator sets, and specialist agricultural equipment. The starter motor for a specific Deutz engine is the same regardless of which equipment the engine is fitted to. The engine-model cross-reference catches all applications. WhatsApp 07754288583 with the Deutz engine model for cross-reference.

Older Deutz engines (1011, 2011, 912 series) are mechanically-injected — straightforward starter requirements, typical 1.5-3.5 kW starters depending on engine size. Modern Deutz engines (TCD-series) are electronically-controlled common-rail engines — slightly higher starter power requirement (more starter cranking time during cold-start ECU initialisation), typical 2.5-4.0 kW starters. Always match the OEM starter specification — wrong-rated starter struggles to crank (under-rated) or damages the wiring (over-rated). The rated power is on every product page.

Yes. Reconditioned and remanufactured starter motors (rebuilt to OEM specification with new wear parts and bench-tested) are available for Deutz engines — typically at lower price than new starters with full warranty. Replacement starter mounting brackets (for older Deutz-Fahr equipment where the original bracket has corroded), replacement solenoid pull-in coils, and matching electrical connectors are available alongside the starter range. Match by the Deutz engine model; WhatsApp 07754288583 for advice on specific reconditioned options.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Deutz-Fahr Starter Motor

FilterFilters
View as Grid List

Within Starter Motor, Deutz-Fahr Starter Motor covers the replacement starter motors cross-referenced for fitment to Deutz-Fahr agricultural tractors, harvesters, and self-propelled equipment — covering the full Deutz-Fahr tractor range (5-, 6-, 7-, 9-Series, plus older Deutz-Fahr equipment) and the matched starter motors fitted to Deutz-engined equipment.

Parts for Machines cross-references starter motors to specific Deutz-Fahr equipment and Deutz engine models — covering both OEM-pattern starter motors (matched exactly to the original starter's specification) and aftermarket starter motors rated for fitment to the listed Deutz-Fahr equipment. Deutz-Fahr (a Same Deutz-Fahr Group brand) is one of the major European agricultural-tractor manufacturers, with tractors widely used across UK and European agriculture.

Product pages list the Deutz-Fahr equipment model and year-range the starter is approved for, the Deutz engine model the starter is fitted to (Deutz-Fahr tractors are predominantly Deutz-engined — the engine model is often the most reliable cross-reference), the OEM cross-reference part number, the operating voltage (typical 12V on smaller tractors; 24V on larger), the rated power, the drive-pinion specification, the rotation direction, the mounting bolt-pattern, and the solenoid-and-connector specification.

For replacement of an existing Deutz-Fahr starter motor, the OEM part number is the most reliable match. Where the part number isn't available, identify by the Deutz engine model first, then by the Deutz-Fahr equipment model. Deutz engines are also fitted to non-Deutz-Fahr equipment (some plant equipment, specialist vehicles) — the same starter motor may cross-reference to non-tractor applications. Aftermarket starter motors cross-referenced for Deutz-Fahr equipment are produced by specialist starter manufacturers — warranty-rated for fitment to the listed equipment. Equipment-make naming on a starter motor refers to the equipment that the starter fits, not the starter's manufacturer. Trade pricing on bulk and fleet orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 181 to 210 of 305 entries
FAQs

Three search paths: (1) OEM Deutz-Fahr part number — normally stamped on the original starter's body or listed in the Deutz-Fahr parts manual; (2) Deutz engine model — Deutz-Fahr tractors are predominantly Deutz-engined (BF4M, BF6M, TCD3.6, TCD4.1, TCD6.1 series, and older 1011, 2011, 912 series); the engine model is often the most reliable cross-reference; (3) Deutz-Fahr tractor model and year. Photograph the engine data plate if uncertain; WhatsApp 07754288583 with the engine model.

Yes. Deutz engines (under the Deutz AG brand) are widely supplied as standalone engines to plant-equipment manufacturers, specialist-vehicle builders, and industrial-equipment makers across Europe and globally. Common applications: telehandlers, smaller wheel loaders, forklifts, generator sets, and specialist agricultural equipment. The starter motor for a specific Deutz engine is the same regardless of which equipment the engine is fitted to. The engine-model cross-reference catches all applications. WhatsApp 07754288583 with the Deutz engine model for cross-reference.

Older Deutz engines (1011, 2011, 912 series) are mechanically-injected — straightforward starter requirements, typical 1.5-3.5 kW starters depending on engine size. Modern Deutz engines (TCD-series) are electronically-controlled common-rail engines — slightly higher starter power requirement (more starter cranking time during cold-start ECU initialisation), typical 2.5-4.0 kW starters. Always match the OEM starter specification — wrong-rated starter struggles to crank (under-rated) or damages the wiring (over-rated). The rated power is on every product page.

Yes. Reconditioned and remanufactured starter motors (rebuilt to OEM specification with new wear parts and bench-tested) are available for Deutz engines — typically at lower price than new starters with full warranty. Replacement starter mounting brackets (for older Deutz-Fahr equipment where the original bracket has corroded), replacement solenoid pull-in coils, and matching electrical connectors are available alongside the starter range. Match by the Deutz engine model; WhatsApp 07754288583 for advice on specific reconditioned options.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service