Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Bench-lifts: raise the entire motorcycle to bench-working height (typical 700-900mm working height) — best for major service work where the operator works around the motorcycle for extended periods. Higher initial cost but better workshop ergonomics. Paddock and rear stands: lift only the rear (or front) wheel off the ground, motorcycle stays at floor level — best for routine chain, brake, and tyre work where the operator works at one end. Lower cost, faster setup, suited to occasional service. Many trade workshops have both for different jobs.

Match by the motorcycle's rear-axle and rear-spool fitment. Most road bikes and sport bikes have rear-axle ends or specific rear-spool mounting points designed for paddock-stand fitting — the paddock stand's pins or hooks engage these points. The pin or hook size must match the motorcycle's spool or axle-end fitting; the stand height should match the motorcycle's natural rear-wheel-clear height. Some motorcycles need a specific paddock stand or specific spools fitted; the manufacturer's fitment guide is the reliable reference.

Match the rated load capacity to the heaviest motorcycle lifted, with margin. For road-bike service (typical 150-250kg dry weight): 300-400kg-rated bench-lifts are sufficient. For cruiser and adventure-bike service (typical 250-350kg dry weight, plus rider equipment): 500kg-rated. For heavy touring and large-cruiser service (350kg+ wet weight): 600kg-rated. Always over-spec rather than under-spec — a marginally-rated lift bottoms out under load. The rated capacity is listed on every bench-lift product page.

Yes — rear paddock-stand spools (in the standard M6, M8, M10 thread sizes), fork-bottom protectors and crash-bobbins, engine-mount support bars (for use during engine-out service), and specialist clamping and frame-support tools are available across the motorcycle accessory range. Match by the motorcycle make and model, or by the specific service operation (engine-out, fork-removal, sub-frame removal). WhatsApp 07754288583 with the motorcycle make for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Motorcycle Lifts and Supports

FilterFilters
View as Grid List

Within Motorcycle Tools, Motorcycle Lifts and Supports covers the bench-and-floor lifts, paddock stands, front and rear stands, and engine-mount supports used in motorcycle service, maintenance, and storage work — covering hydraulic motorcycle bench-lifts (raising the motorcycle to bench-working height for service), paddock and rear stands (lifting the rear wheel for chain, sprocket, and rear-suspension service), front stands (lifting the front wheel for fork, brake, and steering-head service), and the matching engine and frame supports used in heavy engine service.

Parts for Machines supplies motorcycle lifts and supports across the workshop, dealer, and contractor ranges, with rated load capacities typically running from 250kg (compact bench-lifts for road-bike service) up to 600kg+ (heavy-duty bench-lifts for cruiser, touring, and adventure-bike service).

We are an authorised distributor and seller of Sealey, SIP, and Draper across the motorcycle lifts and supports range. Sealey leads the line — covering trade-grade hydraulic motorcycle bench-lifts in the standard load ratings, paddock stands and rear stands sized for the typical road-bike and sport-bike rear-axle dimensions, front stands matched to the standard front-fork sizes, and the matching engine and frame supports. SIP and Draper extend the range with workshop and trade variants.

Product pages list the lift or stand type (hydraulic bench-lift, paddock-stand, rear-stand, front-stand, engine-mount support), the rated load capacity (in kg — must match or exceed the heaviest motorcycle to be lifted), the working height range (minimum and maximum lift height for bench-lifts), the operating mechanism (manual hydraulic, air-hydraulic, electric-hydraulic), the platform dimensions (for bench-lifts), the rear-axle pin or rear-spool fitment (for paddock stands — must match the motorcycle's rear-spool position), and any specific safety features. Trade pricing on multi-unit orders is available; contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 24 of 24 entries
FAQs

Bench-lifts: raise the entire motorcycle to bench-working height (typical 700-900mm working height) — best for major service work where the operator works around the motorcycle for extended periods. Higher initial cost but better workshop ergonomics. Paddock and rear stands: lift only the rear (or front) wheel off the ground, motorcycle stays at floor level — best for routine chain, brake, and tyre work where the operator works at one end. Lower cost, faster setup, suited to occasional service. Many trade workshops have both for different jobs.

Match by the motorcycle's rear-axle and rear-spool fitment. Most road bikes and sport bikes have rear-axle ends or specific rear-spool mounting points designed for paddock-stand fitting — the paddock stand's pins or hooks engage these points. The pin or hook size must match the motorcycle's spool or axle-end fitting; the stand height should match the motorcycle's natural rear-wheel-clear height. Some motorcycles need a specific paddock stand or specific spools fitted; the manufacturer's fitment guide is the reliable reference.

Match the rated load capacity to the heaviest motorcycle lifted, with margin. For road-bike service (typical 150-250kg dry weight): 300-400kg-rated bench-lifts are sufficient. For cruiser and adventure-bike service (typical 250-350kg dry weight, plus rider equipment): 500kg-rated. For heavy touring and large-cruiser service (350kg+ wet weight): 600kg-rated. Always over-spec rather than under-spec — a marginally-rated lift bottoms out under load. The rated capacity is listed on every bench-lift product page.

Yes — rear paddock-stand spools (in the standard M6, M8, M10 thread sizes), fork-bottom protectors and crash-bobbins, engine-mount support bars (for use during engine-out service), and specialist clamping and frame-support tools are available across the motorcycle accessory range. Match by the motorcycle make and model, or by the specific service operation (engine-out, fork-removal, sub-frame removal). WhatsApp 07754288583 with the motorcycle make for cross-reference.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service