Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

By the cartridge. A 310ml tube will not sit in a 380ml frame, and a foam canister threads on rather than being loaded at all. The cartridge is read first.

A skeleton frame is open, so the tube is visible and can be removed part-used. A closed frame supports a soft cartridge along its length, stopping it deforming and jamming.

More force at the plunger for the same effort, which matters on cold or thick sealant that a standard direct-lever gun will not push at all.

A gun using three rods rather than one to drive the plunger, at 380ml. A single rod flexes under the load on the largest cartridges.

The canister threads onto the gun and flow is set by a control valve rather than a trigger stroke, so the bead is metered rather than pushed.

So the gun is cleaned rather than discarded after foam work. Uncoated foam guns are usually a single-use item once the foam has cured inside them.

Clear

Caulking Guns

FilterFilters
View as Grid List

The cartridge decides the gun and the two are not adjustable to each other. A 310ml tube will not sit in a 380ml frame, and a foam canister threads onto a gun rather than being loaded into one at all. Reading the cartridge before the frame is the whole of the selection. Cartridge volume is stated in millilitres on the gun as well as on the tube.

Frame type changes what happens to the cartridge in use. A skeleton frame is open, so the tube is visible and can be removed part-used. A closed or cradle frame supports a soft cartridge along its length, which stops it deforming under pressure and jamming.

Action decides how much force reaches the plunger for the effort applied. A standard manual gun is a direct lever. A heavy duty gun multiplies that, which matters on a cold or thick sealant that a standard gun will not push at all. A gun that cannot push the sealant also wastes the cartridge, since a part-used tube skins over.

A triple rod applicator at 380ml addresses the largest cartridges, where a single rod flexes under the load. Foam guns are threaded and have a control valve rather than a trigger stroke, and a non-stick coating is what lets one be cleaned rather than discarded. Send the sealant to 07754288583 on WhatsApp. Frame length is stated so the gun suits the tube it is bought for rather than only the volume.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 13 of 13 entries
FAQs

By the cartridge. A 310ml tube will not sit in a 380ml frame, and a foam canister threads on rather than being loaded at all. The cartridge is read first.

A skeleton frame is open, so the tube is visible and can be removed part-used. A closed frame supports a soft cartridge along its length, stopping it deforming and jamming.

More force at the plunger for the same effort, which matters on cold or thick sealant that a standard direct-lever gun will not push at all.

A gun using three rods rather than one to drive the plunger, at 380ml. A single rod flexes under the load on the largest cartridges.

The canister threads onto the gun and flow is set by a control valve rather than a trigger stroke, so the bead is metered rather than pushed.

So the gun is cleaned rather than discarded after foam work. Uncoated foam guns are usually a single-use item once the foam has cured inside them.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service