Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

A tool that engages the flywheel or pulley to turn the engine to a position. That is the opposite of a holding tool, which stops it turning while a bolt is worked on.

Yes, because the engagement point differs. Rotators are listed for DAF, MAN, Scania, Mercedes and Volvo, and holding tools for Citroen, Peugeot, Toyota, Vauxhall and BMW N47 and N57.

Sets the crankshaft pulley to the correct position on the nose before tightening, which matters where the pulley is not keyed and could otherwise be fitted wrong.

With a puller, which draws it off square. Levering it distorts the balancer and can damage the crankshaft nose it sits on.

The splined and multi-point pulley fittings that no socket engages. The 13 piece kit covers the common patterns rather than one manufacturer.

1/2 inch square drive, so they run on a standard bar or breaker bar rather than needing a dedicated handle.

Clear

Flywheel & Pulley Tools

FilterFilters
View as Grid List

Turning an engine over and holding it still are opposite jobs that both need a tool. A crankshaft rotator engages the flywheel or the pulley to turn the engine to a position. A holding tool stops it turning while a bolt is torqued or released. Both are also needed on the same job more often than not, since the engine is turned to a position and then held there.

Both are vehicle specific because the engagement point differs. Rotators here are listed for DAF, MAN, Scania, Mercedes and Volvo commercial vehicles on 1/2 inch square drive, and holding tools for Citroen, Peugeot, Toyota, Vauxhall 1.0 and 1.2 belt drive and BMW N47 and N57. A rotator also lets the engine be turned by hand rather than on the starter, which is the only safe way with the belt off.

Pulley alignment is a third job again. A crankshaft pulley alignment tool sets the pulley to the correct position on the nose before it is tightened, which matters where the pulley is not keyed and can be fitted wrong. Commercial rotators engage the flywheel through an inspection cover rather than at the pulley.

Removal uses a puller rather than a lever. A harmonic balancer puller draws the balancer off square, and an alternator pulley tool kit at 13 pieces covers the splined and multi-point pulley fittings that no socket engages. Send the engine to 07754288583 on WhatsApp. A harmonic balancer puller set covers several bolt patterns rather than one application.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 17 of 17 entries
FAQs

A tool that engages the flywheel or pulley to turn the engine to a position. That is the opposite of a holding tool, which stops it turning while a bolt is worked on.

Yes, because the engagement point differs. Rotators are listed for DAF, MAN, Scania, Mercedes and Volvo, and holding tools for Citroen, Peugeot, Toyota, Vauxhall and BMW N47 and N57.

Sets the crankshaft pulley to the correct position on the nose before tightening, which matters where the pulley is not keyed and could otherwise be fitted wrong.

With a puller, which draws it off square. Levering it distorts the balancer and can damage the crankshaft nose it sits on.

The splined and multi-point pulley fittings that no socket engages. The 13 piece kit covers the common patterns rather than one manufacturer.

1/2 inch square drive, so they run on a standard bar or breaker bar rather than needing a dedicated handle.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service