Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Steel cuts hardest and marks softer material. Brassed steel is gentler. Solid brass is softer again and will not spark. Stainless resists corrosion and leaves no contamination.

Where sparking is a risk, such as near fuel, and where the surface is softer than steel. Brass cleans without cutting into what is underneath.

Cleaning without abrading at all, which suits a finished surface or one that would corrode if steel particles were left embedded in it after brushing.

One with a scraper blade on the end, which lifts the deposit a brush alone will not shift, so both actions come from the same tool.

Two, three, five and eight piece sets are held, which cover several fills and sizes at once. That suits varied work where a single brush would be wrong for half of it.

Tar brushes on short and long handles for applying tar and bitumen, a lead dressing tool, a lead knife, a 600g roofing hammer and a roofer's square.

Clear

Brushes

FilterFilters
View as Grid List

Fill material decides what the brush may touch. Steel cuts hardest and marks anything softer than itself. Brassed steel is gentler. Solid brass is softer again and will not spark, which is why it is used near fuel. Stainless resists corrosion and does not contaminate the surface. Reading the fill before the size is what stops a brush marking what it was bought to clean.

Nylon fill sits at the softest end and cleans without abrading at all, which suits a finished surface or one that would corrode if steel particles were left embedded in it. Brass also leaves no ferrous particles behind, which matters where the surface will be painted afterwards.

Form follows access. A hand brush at 250 to 260mm covers an open surface. A brush with a scraper on the end deals with the deposit a brush alone will not lift. Miniature sets reach into a recess where a full brush will not enter. Sets are also the cheaper route into several fills where one brush would be wrong for half the work.

Sets cover several fills at once: two, three, five and eight piece sets are held, along with a rotary tool brush set at 18 pieces for powered cleaning. The roofing tools on this leaf are a separate group: tar brushes on short and long handles, a lead dressing tool, a lead knife, a roofing hammer at 600g and a roofer's square. Send the surface to 07754288583 on WhatsApp.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 26 of 26 entries
FAQs

Steel cuts hardest and marks softer material. Brassed steel is gentler. Solid brass is softer again and will not spark. Stainless resists corrosion and leaves no contamination.

Where sparking is a risk, such as near fuel, and where the surface is softer than steel. Brass cleans without cutting into what is underneath.

Cleaning without abrading at all, which suits a finished surface or one that would corrode if steel particles were left embedded in it after brushing.

One with a scraper blade on the end, which lifts the deposit a brush alone will not shift, so both actions come from the same tool.

Two, three, five and eight piece sets are held, which cover several fills and sizes at once. That suits varied work where a single brush would be wrong for half of it.

Tar brushes on short and long handles for applying tar and bitumen, a lead dressing tool, a lead knife, a 600g roofing hammer and a roofer's square.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service