A flat battery at the roadside or on the driveway can leave you stranded the Sealey RS1 RoadStart Emergency Jump Starter gives you the power to get moving again without needing another vehicle. Delivering up to 1000 peak amps of initial starting power and 300 cold cranking amps, it is suitable for starting 4-cylinder petrol engines up to 2L and 4-cylinder diesel engines up to 2L. The unit starts up to 30 cars before requiring a recharge, depending on crank time, making it a practical solution to keep in the boot or garage. The 0.5m cable and clamp length connects directly to the vehicle battery, while LED battery condition and charge indicators keep you informed of the unit's status. A test cycle button provides a true battery indication rather than a surface charge reading. When recharging at home, the supplied 230V charger features automatic power cut-off to prevent overcharging. A fitted 12V power socket accepts any 12V device with a vehicle accessory socket plug. The composite case includes integral battery clip storage and a carry handle for convenient transport and storage.
Key Features:
A flat battery at the roadside or on the driveway can leave you stranded — the Sealey RS1 RoadStart Emergency Jump Starter gives you the power to get moving again without.
Cable and Clamp Length: 0.5m, with voltage 12V to support accurate product selection. It includes auxiliary output 12V for dependable performance. Suitable for professional workshop, site and maintenance use.
Delivers up to 1000 Peak Amps of initial starting power, with auxiliary output 12V to support accurate product selection. It includes cable & clamp length 0.5m for dependable performance.
Composite case with integral battery clip storage and carry handle, with cable & clamp length 0.5m to support accurate product selection. It includes cold cranking amps 300A for dependable performance.
Suitable for starting vehicles with 4-cylinder petrol engines up to 2L and 4-cylinder diesel engines up to 2L, with cold cranking amps 300A to support accurate product selection.
Starts up to 30 cars before recharging, depending on the length of crank time needed to start each one, with peak amps 1000A to support accurate product selection.