Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

By the process combination on the label first, since that is what the machine will and will not do. MIG, ARC and TIG covers general workshop work; TIG and MMA suits fine work with stick as a fallback.

Read it against the material. The range runs 120A at the light end up to 250A on the AUTOPLUS ladder, 350A with a separate wire feed and 500A on the POWERMIG bodies. Output is stated on 39 of the lines.

It sets voltage and wire speed from the material and wire diameter entered, rather than leaving both to the operator. That gets the arc right first time, which is the practical difference between a synergic and a manual machine.

Control over heat input. Pulsing the current keeps the average heat down while still getting penetration, which is what stops thin material distorting or burning through.

So the power source can stay where it is while the torch goes to the work. On a large fabrication that saves moving the machine repeatedly, and the 250A and 350A bodies here carry it.

Yes, on this leaf. Portable units and the FX100, FX200 and FX300 extractors sit alongside the machines, since welding fume is generated by the process rather than by the machine.

Clear

Multi-Process Welders

FilterFilters
View as Grid List

A multi-process machine buys more than one job in one body, and the combination printed on the label is the first filter. MIG, ARC and TIG in one machine covers most of a general workshop. TIG and MMA together suits fine work with stick as a fallback. MIG and MMA covers production and repair. The combination is chosen before output is compared.

Output current then follows the material. The range runs 120A at the light end through 130A, 160A, 180A, 200A and 250A on the AUTOPLUS ladder, up to 350A with a separate wire feed and 500A on the Sealey POWERMIG bodies. Output current is filterable on 39 of the 68 lines, with wire diameter on 30 and spool size on 28. Sealey run MINIMIG160i and MIG200i bodies at 200A with POWERMIG300i at 400V three phase above them.

Synergic control is the feature worth understanding. On a manual machine, voltage and wire speed are set by the operator and getting them wrong shows in the bead. A synergic machine sets them from the material and wire diameter entered, so the arc is right first time. Pulse adds control over heat input, which is what keeps thin material from distorting. Manual control still has its place where the operator knows the material better than the machine does.

Cart, trolley and separate wire feed packages change how the machine is used rather than what it does. A separate wire feed lets the power source stay put while the torch goes to the work. Welding fume extractors sit on this leaf, from portable units to the FX100, FX200 and FX300. Questions go over WhatsApp on 07754288583 with the material and thickness. CrosArc inverter machines sit alongside in MIG, TIG and MMA combinations sorted by wire size.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 31 to 60 of 68 entries
FAQs

By the process combination on the label first, since that is what the machine will and will not do. MIG, ARC and TIG covers general workshop work; TIG and MMA suits fine work with stick as a fallback.

Read it against the material. The range runs 120A at the light end up to 250A on the AUTOPLUS ladder, 350A with a separate wire feed and 500A on the POWERMIG bodies. Output is stated on 39 of the lines.

It sets voltage and wire speed from the material and wire diameter entered, rather than leaving both to the operator. That gets the arc right first time, which is the practical difference between a synergic and a manual machine.

Control over heat input. Pulsing the current keeps the average heat down while still getting penetration, which is what stops thin material distorting or burning through.

So the power source can stay where it is while the torch goes to the work. On a large fabrication that saves moving the machine repeatedly, and the 250A and 350A bodies here carry it.

Yes, on this leaf. Portable units and the FX100, FX200 and FX300 extractors sit alongside the machines, since welding fume is generated by the process rather than by the machine.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service