Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Spares/ Consumables/ Accessory

Start Now

Shop by Sub Category

FAQs

The tool number on the casting is the key: bodyblades, hooks, screws and bases each name their tools or sizes on the listing, the drop down selector shows everything compatible with a tool, and a photo with the number over WhatsApp settles anything worn past reading.

By teeth per inch against the work: 6 TPI cuts fastest on heavy shaping, 9 TPI is the general panel blade, 12 TPI leaves the finest surface, and all three fit the adjustable holder listed beside them.

Four piece sets in internal and external forms, the coated hooks that pull seals and rings without scoring the bores they come from, each set listed by its number.

By jaw size: the four, six and eight inch bases here each name their vice size, so the vice on the bench picks its base directly.

Yes, retractable reels by bore and duty: fifteen metre reels in 8mm air and water and 10mm forms, and the ten metre half inch air reel, each listing stating bore, length and duty.

Separately and by number: force screws with T bars, extension pieces and puller legs are each listed alone, so a set is rebuilt piece by piece rather than replaced whole.

Clear

Sykes Workshop & Equipment Spares

FilterFilters
View as Grid List

The tool number rule runs through the biggest Sykes shelf: three hundred workshop and equipment spares, most of them listed against the tools they serve, running from panel beating steel through pulling hardware to the bases under the bench vice and the reels above it.

The bodywork corner is the deepest run. Bodyblades come by teeth per inch, the 6, 9 and 12 TPI blades all matched to the same adjustable holder so one handle carries every cut, with the flat bumping tool, the pry and surfacing spoon and the utility dolly alongside, the panel shop's consumable steel replaced by number as it wears rather than the whole kit being retired with its blade.

The pulling and holding hardware follows the same number rule: soft coated hook sets in internal and external four piece forms that pull seals without scoring bores, force screws complete with T bars, extension pieces, puller legs and the triple beam, plus safety wire parts named for their machines by number. Vice swivel bases come by vice size, four, six and eight inch forms each naming their vice, so the jaw width on the bench picks its base directly.

The equipment tail carries retractable hose reels in air and air water forms, fifteen metre reels in 8mm quarter inch and 10mm three eighths bores and the ten metre half inch air reel, with small spare disc packs and the adjustable holders serving the surfacing and blade tools. Every listing names its tool where one applies, the drop down selector shows everything compatible with a tool, and an unmarked part goes over WhatsApp on 07754288583 with the number and a photo for a named answer against its tool.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 312 entries
FAQs

The tool number on the casting is the key: bodyblades, hooks, screws and bases each name their tools or sizes on the listing, the drop down selector shows everything compatible with a tool, and a photo with the number over WhatsApp settles anything worn past reading.

By teeth per inch against the work: 6 TPI cuts fastest on heavy shaping, 9 TPI is the general panel blade, 12 TPI leaves the finest surface, and all three fit the adjustable holder listed beside them.

Four piece sets in internal and external forms, the coated hooks that pull seals and rings without scoring the bores they come from, each set listed by its number.

By jaw size: the four, six and eight inch bases here each name their vice size, so the vice on the bench picks its base directly.

Yes, retractable reels by bore and duty: fifteen metre reels in 8mm air and water and 10mm forms, and the ten metre half inch air reel, each listing stating bore, length and duty.

Separately and by number: force screws with T bars, extension pieces and puller legs are each listed alone, so a set is rebuilt piece by piece rather than replaced whole.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service