Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

By the duty: 4.8 and 5.8 studding serves the hanging, bracketry and general duties most rod leads happily; 8.8 and above take over where rod becomes structural — studs, tie bars, anchors with calculated loads. The class is marked and listed per length; torque tables only apply to rod that carries the class they assume.

Square, then dressed: cut clean, file or grind a small chamfer onto the end, and run a nut over the cut before installation — the thirty-second ritual that prevents the cross-threaded first nut and the seized hanger nobody can adjust later. A nut spun on before cutting and off after also straightens bruised threads.

Service decides: zinc serves the dry interior life, stainless and heavier coatings the wet, washdown and outdoor duties — with the honest note that any coated rod rusts first at its cut ends, where the protection was severed. Cold galvanising paste on cuts in damp service is the cheap completion of the finish.

Within its class, yes — rod is how many studs are made — with the cautions attached: the class must match the joint's requirement, engagement into couplers and tapped holes must run full depth, and hanger-grade studding pressed into 8.8 service stretches at the first honest torque. Match the marking, not the diameter.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Threaded Rods

FilterFilters
View as Grid List

Threaded rods are fastening by the metre: the studding that hangs services, makes studs and anchors, ties assemblies and reaches where no catalogue bolt is long enough, cut to length and finished into whatever the job demands. PartsForMachines supplies threaded rod to the DIN and ISO standards in the section's grades and finishes, with the matching nuts and washers alongside.

The buying language is the section's, stretched long: thread size and pitch in the metric range, property class, 4.8 and 5.8 serving the hanging and general duties studding mostly leads, 8.8 and above where rod becomes structural studs and tie bars, marked and listed per length, and finish, zinc for the dry interior life, heavier coatings and A2 or A4 stainless where weather and washdown rule, in standard metre and longer stock lengths with trade quantities for the services trades that consume it by the bundle.

The working disciplines suit the format: cuts dressed and chamfered so nuts start without persuading, since a burred cut cross-threads its first nut, class respected when rod stands in for studs, because hanger-grade studding torqued like an 8.8 stud stretches, engagement full-depth into couplers and anchors, and corrosion finish matched to the service, a zinc rod in a wet plantroom rusting from its cut ends first.

Bolts, nuts, washers and the section complete the system alongside. For grade and finish selection, contact the team via WhatsApp 07754288583.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 24 of 24 entries
FAQs

By the duty: 4.8 and 5.8 studding serves the hanging, bracketry and general duties most rod leads happily; 8.8 and above take over where rod becomes structural — studs, tie bars, anchors with calculated loads. The class is marked and listed per length; torque tables only apply to rod that carries the class they assume.

Square, then dressed: cut clean, file or grind a small chamfer onto the end, and run a nut over the cut before installation — the thirty-second ritual that prevents the cross-threaded first nut and the seized hanger nobody can adjust later. A nut spun on before cutting and off after also straightens bruised threads.

Service decides: zinc serves the dry interior life, stainless and heavier coatings the wet, washdown and outdoor duties — with the honest note that any coated rod rusts first at its cut ends, where the protection was severed. Cold galvanising paste on cuts in damp service is the cheap completion of the finish.

Within its class, yes — rod is how many studs are made — with the cautions attached: the class must match the joint's requirement, engagement into couplers and tapped holes must run full depth, and hanger-grade studding pressed into 8.8 service stretches at the first honest torque. Match the marking, not the diameter.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service