Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

Match the bit's segment bond hardness to the material. Soft, abrasive materials such as aerated block and lightweight concrete need a harder bond to resist rapid wear. Denser materials like engineering brick require a softer bond so fresh diamonds are exposed as the segment wears. Check the manufacturer's material rating on the product listing before ordering. Using a bit outside its rated material range will blunt segments quickly and reduce barrel life significantly.

Most dry diamond core bits connect via a threaded arbor (typically 1/2-inch BSP or M16) or an SDS-Plus carrier for smaller diameters. Check your drill's chuck or connection type first, then confirm the bit's fitting specification on the product listing. Some bits include an arbor; others require one purchased separately. If you are unsure which arbor suits a specific bit listed on this site, use Ask Simon on the relevant product page for an instant fitment check.

Dry diamond core bits must be run in rotation-only mode, not hammer action. Engaging the hammer function transfers impact directly into the segments, cracking the bond and destroying the bit prematurely. Any corded or cordless drill with a rotation-only setting and sufficient torque for the diameter being used is suitable. For larger diameters, a two-speed drill or dedicated core drill unit is recommended to maintain control and keep heat buildup manageable.

Availability varies by brand and diameter. Common trade sizes range from around 25 mm up to 152 mm, with the mid-range diameters (52 mm to 82 mm) being a preferred choice for first-fix electrical and plumbing work. Some manufacturers list individual bits; others offer multi-diameter trade sets. Check each product listing for pack quantity and included accessories. For bulk or project quantities, contact the team directly at [email protected] or WhatsApp 07754288583 to discuss trade pricing.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Clear

Dry Diamond Core Bits

FilterFilters
View as Grid List

Dry diamond core bits remove material without water, making them the go-to choice for electricians, plumbers, and fixers working on site where a water feed is impractical or simply in the way. The dry format suits brick, aerated block, and softer masonry, where the segment geometry and bond hardness are tuned for dusty, air-cooled cutting rather than the slurry conditions a wet core requires.

Selecting the right bit means matching three things: the diameter to the hole size required, the fitting to the drill's arbor or SDS connection, and the segment specification to the material being cored. Aerated concrete and lightweight block call for a different bond hardness than dense engineering brick, and running a bit rated for soft material into hard aggregate will blunt the segments prematurely. Depth of the barrel also matters where the core needs to clear a wall thickness in a single pass. Everything listed sits within the Abracs dry diamond core bits range.

Dry coring puts heat into the bit faster than wet work, so technique matters: short pecking strokes allow air to cool the segments and clear the dust. Running a dry bit continuously without lifting shortens segment life and can glaze the bond, leaving a bit that spins without cutting. Paired with a good-quality arbor and a hammer drill set to rotation-only mode, a correctly specified dry core bit will last a tradesperson through a working week of standard block and brick work without needing replacement.

PartsForMachines lists dry diamond core bits as an Authorised Distributor and Seller for the ranges covered on this site. For diameter confirmation, arbor compatibility, or trade quantities, contact the team via WhatsApp 07754288583 or email [email protected].

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 33 entries
FAQs

Match the bit's segment bond hardness to the material. Soft, abrasive materials such as aerated block and lightweight concrete need a harder bond to resist rapid wear. Denser materials like engineering brick require a softer bond so fresh diamonds are exposed as the segment wears. Check the manufacturer's material rating on the product listing before ordering. Using a bit outside its rated material range will blunt segments quickly and reduce barrel life significantly.

Most dry diamond core bits connect via a threaded arbor (typically 1/2-inch BSP or M16) or an SDS-Plus carrier for smaller diameters. Check your drill's chuck or connection type first, then confirm the bit's fitting specification on the product listing. Some bits include an arbor; others require one purchased separately. If you are unsure which arbor suits a specific bit listed on this site, use Ask Simon on the relevant product page for an instant fitment check.

Dry diamond core bits must be run in rotation-only mode, not hammer action. Engaging the hammer function transfers impact directly into the segments, cracking the bond and destroying the bit prematurely. Any corded or cordless drill with a rotation-only setting and sufficient torque for the diameter being used is suitable. For larger diameters, a two-speed drill or dedicated core drill unit is recommended to maintain control and keep heat buildup manageable.

Availability varies by brand and diameter. Common trade sizes range from around 25 mm up to 152 mm, with the mid-range diameters (52 mm to 82 mm) being a preferred choice for first-fix electrical and plumbing work. Some manufacturers list individual bits; others offer multi-diameter trade sets. Check each product listing for pack quantity and included accessories. For bulk or project quantities, contact the team directly at [email protected] or WhatsApp 07754288583 to discuss trade pricing.

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service