Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: PCSR35BG
Machinery shakes; pipes and looms shouldn't. The clip between them does the absorbing.
JCS describes its P-clips as suited to the most challenging environments, and the PCSR35BG carries that specification at 35mm closed diameter: a standard TPE liner rated -30C to +60C, UV and ozone resistant, wrapped in a ribbed band that bolts flush through a 6.6mm M6 fixing hole. Fixings are not supplied - pair it with your standard M6 hardware.
In 304 stainless (18/8, EN 1.4301), this is the version for runs that live outside or around moisture - the liner shrugs off UV and ozone, and the band will not rust where a plated clip eventually would. Dimensions are identical to the zinc version, so the mounting interchange is direct. The standard liner's -30C to +60C rating covers general routing duty; where temperatures climb higher, the dimensionally identical high-temperature version takes over.
Also available - the high-temperature liner version (PCSH35BG); the zinc plated version (PCZR35BG); the 32mm size (PCSR32BG); the 38mm size (PCSR38BG).
Non-standard sizes and liners are available from JCS on request - this catalogue size is the stocked, off-the-shelf format.
| Closed Diameter | 35mm (approx 1 3/8 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | 304 stainless steel 18/8 (EN 1.4301, BS304) |
| Liner | standard TPE liner (-30C to +60C), UV and ozone resistant |
| Overall Height (A) | 22mm |
| Leg/Base Length (B) | 31mm |
| Material Thickness (C) | 0.9mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | PCSH35BG | PCZR35BG | PCSR32BG | PCSR38BG |
| Material | Stainless steel | Mild steel zinc plated | Stainless steel | Stainless steel |
| Clip Type | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 35mm | 35mm | 32mm | 38mm |
| Fixing Thread | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
A. P-clips are sized by closed diameter, and this one closes at 35mm - so it suits a pipe, hose or cable with a 35mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request.
A. The standard TPE liner absorbs vibration and prevents chafing of the item being clamped. It is UV and ozone resistant and rated for service from -30C to +60C.
A. Fixings are not included - pair the clip with your standard M6 hardware; the fixing hole is 6.6mm.
A. The 304 stainless version suits wet, salty or corrosive environments; the zinc plated version (coated on all surfaces including cut edges) suits general indoor and light industrial use. Both are made to identical dimensions, so you can switch material without changing your mounting.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. Yes - the design brief covers pipes, hoses and cables alike. The liner cushions the sheath against chafe and vibration, which matters as much on an armoured cable or air line as on a coolant hose. Size by outside diameter.
A. This is a pack of 25 clips, all 35mm closed diameter.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
