Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
The cheapest insurance on any pipe run is the clip that stops it moving.
JCS describes its P-clips as suited to the most challenging environments, and the PCZH10BG carries that specification at 10mm closed diameter: a TPE160 high-temperature liner rated -50C to +160C, UV and ozone resistant, wrapped in a ribbed band that bolts flush through a 6.6mm M6 fixing hole. Fixings are not supplied - pair it with your standard M6 hardware.
The band is mild steel, heavily electro zinc plated on every surface - JCS plates after cutting, so even the cut edges are coated - making it the general purpose choice for indoor, automotive and light industrial routing. Dimensions are identical to the stainless version if the environment later demands an upgrade. With the TPE160 liner rated to +160C, it is the version to specify where heat builds - engine compartments, exhaust-adjacent runs and hot plant.
Also available - the standard liner version (PCZR10BG); the 304 stainless version (PCSH10BG); the 9mm size (PCZH9BG); the 12mm size (PCZH12BG).
One specification covers pipes, hoses and cables alike - fewer part numbers, tidier stores.
| Closed Diameter | 10mm (approx 3/8 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | Mild steel, heavily electro zinc plated and passivated |
| Liner | TPE160 high-temperature liner (-50C to +160C), UV and ozone resistant |
| Overall Height (A) | 9mm |
| Leg/Base Length (B) | 18mm |
| Material Thickness (C) | 0.9mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 50 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
|||||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | PCSH10BG | PCZR10BG | PCZH44BG | PCZH48BG | PCZH52BG |
| Material | Stainless steel | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated | Mild steel zinc plated |
| Clip Type | P-clip | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 10mm | 10mm | 44mm | 48mm | 52mm |
| Fixing Thread | M6 | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size | Single size |
| Grade | 304 | ||||
A. P-clips are sized by closed diameter, and this one closes at 10mm - so it suits a pipe, hose or cable with a 10mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request. That is approximately 3/8 in, if you work in imperial.
A. The TPE160 high-temperature liner absorbs vibration and prevents chafing of the item being clamped. It is UV and ozone resistant and rated for service from -50C to +160C.
A. Fixings are not included - pair the clip with your standard M6 hardware; the fixing hole is 6.6mm.
A. The 304 stainless version suits wet, salty or corrosive environments; the zinc plated version (coated on all surfaces including cut edges) suits general indoor and light industrial use. Both are made to identical dimensions, so you can switch material without changing your mounting.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. Yes - JCS P-clips are designed for fixing pipes, hoses and cables, with the lined band protecting a cable sheath - armoured or otherwise - from chafing while absorbing vibration. Match the closed diameter to the cable's outside diameter.
A. This is a pack of 50 clips, all 10mm closed diameter.
A. Every product comes with a different guarantee and warranty. Warranty details are shown in the product's tech specs or datasheet where available.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
