Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: PCZH56BG
Variations
A cable tie is a temporary answer to a permanent question - fixed runs need a bolted, lined clip.
Sized at 56mm closed diameter with a 6.6mm hole for an M6 bolt, the PCZH56BG fixes pipes, hoses and cables to panels, frames and structures. Its TPE160 high-temperature liner - rated -50C to +160C - cushions the line against vibration and chafe and resists UV and ozone, while the ribbed band sits flush to the surface it is bolted to. Nuts and bolts are not included.
Heavily zinc plated over mild steel with the plating applied after cutting, it is the everyday fixing for engine bays, chassis runs and workshop pipework in non-corrosive conditions; for persistently wet or salty duty the dimensionally identical stainless version is the straight swap. With the TPE160 liner rated to +160C, it is the version to specify where heat builds - engine compartments, exhaust-adjacent runs and hot plant.
Also available - the standard liner version (PCZR56BG); the 304 stainless version (PCSH56BG); the 52mm size (PCZH52BG); the 60mm size (PCZH60BG).
Designed, manufactured and tested in-house at Sudbury, Suffolk under ISO 9001:2015, with over 180 years of British manufacturing behind it.
| Closed Diameter | 56mm (approx 2 3/16 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | Mild steel, heavily electro zinc plated and passivated |
| Liner | TPE160 high-temperature liner (-50C to +160C), UV and ozone resistant |
| Overall Height (A) | 32mm |
| Leg/Base Length (B) | 42mm |
| Material Thickness (C) | 1.2mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | PCZR56BG | PCSH56BG | PCZH52BG | PCZH60BG |
| Material | Mild steel zinc plated | Stainless steel | Mild steel zinc plated | Mild steel zinc plated |
| Clip Type | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 56mm | 56mm | 52mm | 60mm |
| Fixing Thread | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | |||
A. P-clips are sized by closed diameter, and this one closes at 56mm - so it suits a pipe, hose or cable with a 56mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request.
A. It does two jobs: cushioning the line against vibration and stopping the band chafing what it holds. The TPE160 high-temperature liner is UV and ozone resistant, rated -50C to +160C.
A. Check your service temperature: the standard black TPE liner is rated -30C to +60C, while the grey TPE160 high-temperature liner is rated -50C to +160C. For engine bays and hot environments specify the high-temperature version.
A. Fixings are not included - pair the clip with your standard M6 hardware; the fixing hole is 6.6mm.
A. The 304 stainless version suits wet, salty or corrosive environments; the zinc plated version (coated on all surfaces including cut edges) suits general indoor and light industrial use. Both are made to identical dimensions, so you can switch material without changing your mounting.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. This is a pack of 25 clips, all 56mm closed diameter.
A. We accept all major credit and debit cards, along with PayPal.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
