Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
The cheapest insurance on any pipe run is the clip that stops it moving.
The PCSH44BG is a JCS lined P-clip with a 44mm closed diameter, sized to wrap a pipe, hose or cable of that outside diameter and bolt it to a surface through its M6 fixing hole (6.6mm). The TPE160 high-temperature liner absorbs vibration and prevents chafing, is UV and ozone resistant, and is rated for service from -50C to +160C. A strengthening rib in the band keeps the clip flush against the mounting face. Fixing nuts and bolts are not supplied.
The band is 18/8 marine-quality 304 stainless steel (EN 1.4301, BS304), the right specification for outdoor, wet and corrosive environments - and because JCS makes the zinc and stainless versions to identical dimensions, you can switch material without changing your mounting. With the TPE160 liner rated to +160C, it is the version to specify where heat builds - engine compartments, exhaust-adjacent runs and hot plant.
Also available - the standard liner version (PCSR44BG); the zinc plated version (PCZH44BG); the 40mm size (PCSH40BG); the 48mm size (PCSH48BG).
Non-standard sizes and liners are available from JCS on request - this catalogue size is the stocked, off-the-shelf format.
| Closed Diameter | 44mm (approx 1 3/4 in) |
|---|---|
| Bolt Type | M6 (hole 6.6mm) |
| Material | 304 stainless steel 18/8 (EN 1.4301, BS304) |
| Liner | TPE160 high-temperature liner (-50C to +160C), UV and ozone resistant |
| Overall Height (A) | 26mm |
| Leg/Base Length (B) | 36mm |
| Material Thickness (C) | 0.9mm |
| Tab Width (E) | 12.6mm |
| Clip Width (F) | 16mm |
| Clip Slot Width (G) | 7mm |
| Applications | Fixing pipes, hoses & cables to a surface; vibration-absorbing routing on vehicles, machinery & structures (per JCS) |
| Pack Quantity | 25 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS P-Clip Data Sheet (1).pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||||
| Technical Specification | ||||
|---|---|---|---|---|
| PRODUCT NUMBER | PCSR44BG | PCZH44BG | PCSH40BG | PCSH48BG |
| Material | Stainless steel | Mild steel zinc plated | Stainless steel | Stainless steel |
| Clip Type | P-clip | P-clip | P-clip | P-clip |
| Closed Diameter | 44mm | 44mm | 40mm | 48mm |
| Fixing Thread | M6 | M6 | M6 | M6 |
| Format | Single size | Single size | Single size | Single size |
| Grade | 304 | 304 | 304 | |
A. P-clips are sized by closed diameter, and this one closes at 44mm - so it suits a pipe, hose or cable with a 44mm outside diameter. Measure the OD, not the bore; non-standard sizes are available from JCS on request. That is approximately 1 3/4 in, if you work in imperial.
A. The TPE160 high-temperature liner absorbs vibration and prevents chafing of the item being clamped. It is UV and ozone resistant and rated for service from -50C to +160C.
A. Check your service temperature: the standard black TPE liner is rated -30C to +60C, while the grey TPE160 high-temperature liner is rated -50C to +160C. For engine bays and hot environments specify the high-temperature version.
A. No - fixing nuts and bolts are not supplied. The clip has a 6.6mm hole to suit an M6 bolt.
A. The 304 stainless version suits wet, salty or corrosive environments; the zinc plated version (coated on all surfaces including cut edges) suits general indoor and light industrial use. Both are made to identical dimensions, so you can switch material without changing your mounting.
A. The TPE liner is UV and ozone resistant, and the clip is available in heavily zinc plated steel or 304 stainless steel for outdoor and corrosive environments - choose stainless where conditions are persistently wet, and match the closed diameter to the tube you are fixing.
A. This is a pack of 25 clips, all 44mm closed diameter.
A. WhatsApp us on 07754 288583 with photos of the item and packaging.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
