Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £2.99 | 2 to 3 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £9.99 | 7 to 10 working days |
Product Number: HGZ460BP
Most hose failures start at the connection, not the hose - a clip that creeps loose under vibration lets the joint seep long before it lets go.
Sized to adjust between 430-460mm, the HGZ460BP carries the construction details Hi-Grip is specified for - rolled screw threads on a cold-headed, work-hardened hex head, fully rounded band edges, and a published tightening torque of 6.0 Nm (54 lb-in) for this size band. The range is made to exceed BS5315 and holds the BSI Kitemark and NATO approval.
Boxed as 5 clips for stores and production use, it carries JCS's general purpose specification - electro zinc plated and passivated mild steel tested to EN9227. JCS supplies leading agricultural machinery manufacturers, and the same clips serve workshop, fleet and light industrial pipework. Size each joint by the fitted outside diameter of the hose.
Also available - the 410-440mm size (HGZ440BP); the 450-480mm size (HGZ480BP).
The larger adjustment range per size means one JCS clip covers spans that would take two ordinary nut-and-bolt clamps.
JCS recommends letting the application decide - what the hose carries, the temperature and pressure it sees, and how corrosive the environment is - then matching the clip's adjustment range to the fitted hose diameter.
| Adjustment Range | 430-460mm (approx 16 15/16 - 18 1/8 in) |
|---|---|
| Material | Zinc plated mild steel (passivated, EN9227 tested) |
| Type | Worm drive |
| Recommended Torque | 6.0 Nm (54 lb-in) |
| Standard | Manufactured to exceed BS5315; BSI Kitemark; NATO approved |
| Applications | Domestic, automotive & industrial hose connections; used across the automotive sector and by leading agricultural machinery manufacturers (per JCS) |
| Pack Quantity | 5 |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
JCS HI-GRIP®.pdf
|
Open Now |
Standard Delivery: £2.99
Delivery Estimate: 2 to 3 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
||
| Technical Specification | ||
|---|---|---|
| PRODUCT NUMBER | HGZ440BP | HGZ480BP |
| Material | Mild steel zinc plated | Mild steel zinc plated |
| Clamping Range | 410-440mm | 450-480mm |
| Clip Type | Worm drive | Worm drive |
| Format | Single size | Single size |
| Pack Qty | 5 | 5 |
A. This size spans 430-460mm of fitted hose outside diameter. Measure the hose over its fitting, not the bare bore - anywhere inside 430-460mm and the HGZ460BP is the right clip. One JCS size covers a span that would take two fixed nut-and-bolt clamps.
A. For this size band JCS publishes a recommended torque of 6.0 Nm (54 lb-in). Work up to it gradually with the clip seated centrally on the barb; going past it risks damaging the hose rather than improving the seal.
A. JCS advises against zinc plated clips in marine conditions, where they can corrode or seize. For boats and other saltwater environments use Hi-Grip Stainless, which is 18/8 marine-quality 304 stainless steel with Lloyd's Register Type Approval.
A. The zinc plated Hi-Grip is JCS's general purpose worm drive clip for domestic, automotive and industrial hose connections in non-corrosive environments. JCS clips are used across the automotive sector and by leading agricultural machinery manufacturers.
A. Start from the application, as JCS's own guidance does: what the hose carries, the temperature and pressure involved, and whether the environment is corrosive. Dry, general duty points to this zinc plated clip; wet, salty or chemical exposure points to the stainless range. Then size by the fitted hose diameter.
A. JCS designs against it: the hex screw is cold-headed and work-hardened with rolled threads, so it holds its setting and will not round off. On high-vibration equipment, JCS's guidance is to recheck the clip after service to keep the seal intact.
A. This is a pack of 5 clips, all 430-460mm adjustment range. Other pack formats of the same clip are listed separately.
A. In-stock orders placed before 14:30 Monday to Friday are usually dispatched the same day.
A. Yes - WhatsApp us on 07754 288583 with any questions about specifications, suitability, or compatibility.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
