Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

Access before size. A bearing with its back face reachable is pulled from behind with a separator. A blind bearing in a closed housing can only be gripped from the inside.

One with a collet that expands inside the bearing bore and grips as it is pulled, usually with a slide hammer. It is the only route where nothing can get behind the race.

The bearing outer diameter the jaws will close behind, at 30 to 50mm and larger. A separator outside that range either will not close or will not clear the bearing.

A mechanical set is turned by hand and is simpler. A hydraulic set applies far more force with less effort, which matters on a bearing corroded onto a shaft.

One that spans the housing and pulls against its face rather than gripping behind the bearing, which suits a bearing recessed where a separator cannot be positioned.

With an insertion kit, which drives on the correct race rather than through the balls. Driving on the wrong race damages a new bearing before it has turned.

Clear

Bearing Tools

FilterFilters
View as Grid List

How the bearing can be reached decides the tool before its size does. A bearing with its back face accessible is pulled from behind with a separator. A blind bearing, sitting in a closed housing, has nothing behind it and can only be gripped from the inside and drawn out with a slide hammer. Establishing that first avoids buying a separator for a bearing nothing can get behind.

That is why blind bearing pullers exist as a separate family rather than as a variant. The collet expands inside the bearing bore and grips as it is pulled, which is the only route where a puller cannot get behind the race.

Once access is settled, size range narrows it. Separators here run 30 to 50mm and larger, and the range refers to the bearing outer diameter the jaws will close behind. A separator outside that range either will not close or will not clear. Sealey hold separator and puller sets at 8, 10 and 12 pieces across mechanical and hydraulic forms.

Mechanical or hydraulic decides how the force is applied. A mechanical set is turned by hand and is simpler. A hydraulic set applies far more force with less effort, which matters on a bearing that has corroded onto a shaft. Insertion kits refit without damaging the new bearing. Send the housing detail to 07754288583 on WhatsApp. Slide hammers are supplied with the blind bearing sets since the two are used together.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 27 of 27 entries
FAQs

Access before size. A bearing with its back face reachable is pulled from behind with a separator. A blind bearing in a closed housing can only be gripped from the inside.

One with a collet that expands inside the bearing bore and grips as it is pulled, usually with a slide hammer. It is the only route where nothing can get behind the race.

The bearing outer diameter the jaws will close behind, at 30 to 50mm and larger. A separator outside that range either will not close or will not clear the bearing.

A mechanical set is turned by hand and is simpler. A hydraulic set applies far more force with less effort, which matters on a bearing corroded onto a shaft.

One that spans the housing and pulls against its face rather than gripping behind the bearing, which suits a bearing recessed where a separator cannot be positioned.

With an insertion kit, which drives on the correct race rather than through the balls. Driving on the wrong race damages a new bearing before it has turned.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service