Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

Brands

FAQs

On the diameter range it covers. Mini cutters run 3 to 22mm and standard bodies 3 to 30mm, and a cutter outside its range will not close on the pipe properly.

It turns in a confined space where a full size cutter cannot be rotated round the pipe. That is usually the reason rather than the diameter itself.

Tightened a little between each turn so the wheel scores progressively. Forcing it in one turn distorts the pipe rather than parting it cleanly.

Yes. Leaving the burr restricts the bore and, on a water or gas line, holds debris that eventually reaches a valve or a fitting downstream.

One that prepares the outside of the cut end for a fitting at 13 to 19mm, which is a separate operation from taking the internal burr off.

One that restores a worn valve seat at 12 and 19mm rather than replacing the tap. That addresses a drip caused by the seat rather than the washer.

Clear

Metal Pipe Cutting

FilterFilters
View as Grid List

The cutter is bought on the diameter range it covers, and a cut is only finished once the burr is taken off the inside of the pipe. Leaving it restricts the bore and, on a water or gas line, holds debris that eventually reaches a valve or a fitting. Deburring is also far easier immediately after the cut than once the pipe is installed.

Diameter range runs 3 to 22mm on the mini cutters and 3 to 30mm on the standard bodies. A mini cutter turns in a confined space where a full size cutter cannot be rotated round the pipe, which is usually the reason for choosing one. Both ranges start at 3mm, so the difference between them is how large a pipe they will reach round.

A rotating cutter scores progressively rather than cutting in one pass. The wheel is tightened a little between each turn, which is what leaves a square end rather than a spiral. Forcing it in one turn distorts the pipe rather than parting it. Cutting wheels are replaceable and are the consumable rather than the cutter body.

Finishing tools sit on the same leaf because the cut is not the last operation. An external chamfer deburring tool at 13 to 19mm prepares the outside for a fitting, and a tap reseating tool at 12 and 19mm restores a worn seat rather than replacing the tap. Send the pipe size to 07754288583 on WhatsApp. A drain blaster is seated on the same leaf as adjacent plumbing equipment.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 14 of 14 entries
FAQs

On the diameter range it covers. Mini cutters run 3 to 22mm and standard bodies 3 to 30mm, and a cutter outside its range will not close on the pipe properly.

It turns in a confined space where a full size cutter cannot be rotated round the pipe. That is usually the reason rather than the diameter itself.

Tightened a little between each turn so the wheel scores progressively. Forcing it in one turn distorts the pipe rather than parting it cleanly.

Yes. Leaving the burr restricts the bore and, on a water or gas line, holds debris that eventually reaches a valve or a fitting downstream.

One that prepares the outside of the cut end for a fitting at 13 to 19mm, which is a separate operation from taking the internal burr off.

One that restores a worn valve seat at 12 and 19mm rather than replacing the tap. That addresses a drip caused by the seat rather than the washer.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service