Induction Heater Coils by Coil Type & Size

Shop by Sub Category

Type

Ceramic Ring
Coolant
Heating Wire
Induction Coil

FAQs

KM Equipment direct and side coils come in 6mm, 8mm, 10mm, 12mm, 16mm, 20mm and 22mm coil IDs. The size is also in the part number, such as KMIC-016D for 16mm.

Yes, Sykes Pickavant coils are on Sykes Induction Heater Coils, and Sealey coils are on Sealey Vehicle Service Tool Spares. More Draper coils are on Draper Compressor, Air & Welding Spares.

Yes, KM Equipment flexi coils come as KMIC-FLX800 and KMIC-FLX1000. KMIC-ceramic supplies ceramic rings for the flexi coils, and the Coil Type filter lists it under Flexi.

Yes, KM Equipment induction heating wire comes in four versions: KMIC-HW, KMIC-HW750, KMIC-HW850 and KMIC-HW1000.

Clear

Find induction heater coils from KM Equipment and Draper among over 20 coils, heating wires and coolant. Most are KM Equipment coils, and their shapes include direct, side, flexi, hook, pad and spot coils. Use the Coil Type filter to choose the shape, and the Coil ID filter to choose the size of a direct or side coil.

Draper welding focus coils come in three versions: 12039 straight with extender, 12040 inclined and 12041 side. Other KM Equipment coils include the KMIC-M28 D direct coil and the KMIC-PAD and KMIC-PAD60 pad coils. The Type filter splits the page into induction coils, heating wire, coolant and ceramic rings.

To find a coil, search by the KMIC or Draper part number in the Product Name. KM Equipment part numbers start with KMIC, as in KMIC-HOOK for the hook coil and KMIC-SPOT26FE for the spot coil. If the number on your coil is hard to read, send a photo of the coil and your heater on WhatsApp to 07754288583. Induction heaters, including KM Equipment and Draper models, are on induction heating. For other workshop spares and consumables, browse the sections under Parts & Spares, such as Welding Consumables & Accessories.