Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

find the right

Spares/ Consumables/ Accessory

Start Now

Shop by Sub Category

FAQs

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Grit selection depends on material, machine, and the stage of the job. Lower numbers (24 to 60) suit aggressive stock removal on hardwood, metal, or old coatings. Mid-range grits (80 to 120) bridge stock removal and surface preparation. Finer grits (150 and above) are used for finishing passes where surface quality matters. For floor sanding sheets, starting grit is usually dictated by floor condition, with progressively finer passes to close the grain. When the material or machine is fixed, grit choice narrows quickly, so note both before ordering.

Sanding belt sizes are given as width by length, for example 4 x 36 or 13 x 457. To confirm the correct size, measure the belt laid flat: width across the short dimension and circumference (the full loop length) along the long dimension. If you are replacing an existing belt, check the label on the old belt before it wears away. Sizes are machine-specific, so the same bench sander model can accept only one belt dimension. If you are unsure of the size your machine takes, note the make and model before contacting the team.

135mm sanding sheets are a common format for palm sanders and detail sanders that use a rectangular or square pad, but sheet size must match the platen exactly for the clamp system to grip correctly. 178mm sanding discs are sized for large angle grinders and bench-mounted disc sanders; the bore and backing type must suit the specific machine arbor. Quick-lock and fibre-disc formats use different attachment systems, so confirm whether your grinder takes a threaded, hook-and-loop, or quick-change centre before ordering.

Trade quantities are available across the sanding and finishing range listed on PartsForMachines. Many formats including sanding belts, sanding sheets, and sanding discs are listed in packs, with quantity options suited to workshop throughput rather than single-use purchase. Mixed-grit packs are available on selected lines. If you need a specific grit assortment or a larger volume than the listed pack sizes cover, contact the team by WhatsApp 07754288583 or email [email protected] with your requirements.

Clear

Sanding & Finishing

FilterFilters
View as Grid List

Fifteen hundred lines of abrasive run this shelf between them, and two numbers pick every single one: the grit, which sets how hard the abrasive cuts into the work, and the size or fit, which matches it to the machine that drives it.

The grit logic is the shelf's grammar throughout: low numbers rip material away fast, high numbers refine the surface, and work walks up the scale stage by stage, each grit erasing the scratches of the one before it, which is why the discs, belts and sheets are all stocked in graded runs of the same size and fixing. The forms follow the machines exactly, sanding discs by diameter and fixing, hook and loop leading the fixings, for the orbital and angle machines, belts by their length and width pairing for the belt machines, and the sheets cut ready for the detail and third sheet sanders, all packed in tens because sanding consumes whatever is fitted to the machine.

The finishing tail carries the work on past abrasive: nylon and felt polishing wheels in their packs of three, the 80 millimetre wool polishing pads on hook and loop, and the compounding pads that bring paint and metal up to shine, while the wire brush corner serves fabrication directly, the welding brushes in general purpose, two handle, D handle and brass and nylon forms that clean the work before and after the arc strikes.

Grit and size typed into search land the abrasive at once, the machine's pad or platen names the fit exactly, and a worn disc or an unmarked belt measured and photographed over WhatsApp on 07754288583 comes back named, with its graded neighbours noted for the stages either side.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 1 to 30 of 666 entries
FAQs

Returns are accepted within 30 days of purchase, in original packaging, on orders delivered within the United Kingdom. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will typically arrange collection and replacement at no cost to you. For parts that don't fit your machine, the Fit Guarantee covers a hassle-free return at no cost. For buyer's remorse — you've changed your mind or ordered the wrong item, email us first to obtain a Return Merchandise Number; a restocking fee may apply. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and 'Check where we deliver' confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Grit selection depends on material, machine, and the stage of the job. Lower numbers (24 to 60) suit aggressive stock removal on hardwood, metal, or old coatings. Mid-range grits (80 to 120) bridge stock removal and surface preparation. Finer grits (150 and above) are used for finishing passes where surface quality matters. For floor sanding sheets, starting grit is usually dictated by floor condition, with progressively finer passes to close the grain. When the material or machine is fixed, grit choice narrows quickly, so note both before ordering.

Sanding belt sizes are given as width by length, for example 4 x 36 or 13 x 457. To confirm the correct size, measure the belt laid flat: width across the short dimension and circumference (the full loop length) along the long dimension. If you are replacing an existing belt, check the label on the old belt before it wears away. Sizes are machine-specific, so the same bench sander model can accept only one belt dimension. If you are unsure of the size your machine takes, note the make and model before contacting the team.

135mm sanding sheets are a common format for palm sanders and detail sanders that use a rectangular or square pad, but sheet size must match the platen exactly for the clamp system to grip correctly. 178mm sanding discs are sized for large angle grinders and bench-mounted disc sanders; the bore and backing type must suit the specific machine arbor. Quick-lock and fibre-disc formats use different attachment systems, so confirm whether your grinder takes a threaded, hook-and-loop, or quick-change centre before ordering.

Trade quantities are available across the sanding and finishing range listed on PartsForMachines. Many formats including sanding belts, sanding sheets, and sanding discs are listed in packs, with quantity options suited to workshop throughput rather than single-use purchase. Mixed-grit packs are available on selected lines. If you need a specific grit assortment or a larger volume than the listed pack sizes cover, contact the team by WhatsApp 07754288583 or email [email protected] with your requirements.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service