Filters
A set is bought for the size range it covers rather than the piece count, and the two are not the same thing. A 5 piece set covering the sizes actually met is worth more than a 7 piece set with three sizes that never get used and a gap where one is needed. Reading the size list rather than the count is what makes two sets comparable.
Punch type is what the set is built round. Parallel pin punches drive a pin the whole way through at a constant diameter. Hollow punches cut a hole through sheet or gasket material. Nailsets sink a nail below the timber surface. None substitutes for another.
Combined chisel and punch sets pair the two because the jobs run together. Something is cut or sheared with the chisel and then a pin or a rivet is driven out with the punch, and having both in one tray is what stops one being missing when the other is in hand. Both are supplied in a tray so a missing punch is obvious before the job needs it.
Shank section appears here as it does on chisels, with octagonal shanks that do not roll in the hand. Sets run 4, 5, 6 and 7 pieces, and the sizes covered are stated per set rather than only the count. Send the sizes needed to 07754288583 on WhatsApp. Punch and chisel sets are also the cheaper route into both families than buying each separately.
| Model No | AK9109M |
|---|---|
| Brand | Premier |
| Contents | Ø3, Ø4, Ø5, Ø5.5, Ø6, Ø7, Ø8, Ø10, Ø12mm, Tool Roll |
| Nett Weight | 0.98kg |
| Type | Metric |
| Model No | AK9216 |
|---|---|
| Brand | Premier |
| Contents | Taper Punches; Ø2 x 135, Ø3 x 145, Ø4 x 150, Ø5 x 160, Ø6 x 170mm, Pin Punches; Ø2 x 110, Ø3 x 120, Ø4 x 125, Ø5 x 135, Ø6 x 145mm, Centre Punches; #3 x 125, #5 x 150mm, Cold Chisels; 10 x 140, 13 x 150, 16 x 165mm, Chisel Gauge |
| Nett Weight | 1.19kg |
| Model No | S0805 |
|---|---|
| Brand | Siegen |
| Contents | Cold Chisels; 10 x 140, 13 x 150, 16 x 170, 19 x 175, 22 x 200, 25 x 250mm, Taper Punches; Ø1.5 x 140, Ø2.4 x 140, Ø3 x 140, Ø4 x 140, Ø5 x 140, Ø6 x 140mm, Pin Punches; Ø1 x 150, Ø2.4 x 150, Ø3 x 150, Ø4 x 150, Ø5 x 150, Ø6 x 150mm, Centre Punches; Ø6 x 100, Ø6 x 140, Ø8 x 115mm |
| Nett Weight | 2.72kg |
| Pin Length | 115-250mm |
| Model No | AK9148 |
|---|---|
| Brand | Premier |
| Contents | 12, 16, 19, 22mm |
| Length | 350mm |
| Nett Weight | 1.56kg |
| Model No | AK9147 |
|---|---|
| Brand | Premier |
| Contents | Ø10, Ø12, Ø14, Ø16mm |
| Length | 350mm |
| Nett Weight | 1.85kg |
| Model No | AK9215 |
|---|---|
| Brand | Premier |
| Contents | Pin Punches; Ø4, Ø5, Ø6, Ø7, Ø8, Ø10mm, Chisels; 13, 16, 19, 22, 25mm, Centre Punch; Ø3mm, Hammer-Thru Grip with Hand Guard |
| Nett Weight | 2.15kg |
| Model No | AK91226 |
|---|---|
| Brand | Premier |
| Contents | Ø10, Ø12, Ø14, Ø16, Ø18, Ø20mm |
| Nett Weight | 3.85kg |
| Pin Length | 350mm |
| Model No | AK9298 |
|---|---|
| Brand | Premier |
| Contents | Pin Punches; Ø2 x 114, Ø2.5 x 127, Ø3 x 133, Ø4.5 x 146, Ø5 x 152, Ø6.5 x165mm, Centre Punches; Ø3 x 124, Ø4 x 127, Ø5 x 143mm, Taper Punches; Ø2.5 x 114, Ø3 x 127, Ø3 x 257, Ø5 x 140, Ø5 x 257, Ø5.5 x 152, Ø6.5 x 165, Ø6.5 x 257mm, Cold Chisels; 8 x 133, 9.5 x 146, 11 x 159, 13 x 171, 16 x 184, 19 x 197, 22 x 203, 25 x 205, 30 x 216mm |
| Nett Weight | 3.81kg |
| Model No | AK9130 |
|---|---|
| Brand | Premier |
| Contents | Long Pin Punches; Ø3 x 9.5 x 200, Ø4 x 9.5 x 200, Ø5 x 9.5 x 200, Ø6 x 9.5 x 200, Ø8 x 12.7 x 200, Ø10 x 12.7 x 200mm, Pin Punches; Ø2 x 8 x 115, Ø3 x 8 x 125, Ø4 x 9.5 x 150, Ø5 x 9.5 x 165, Ø6 x 12.7 x 180, Ø8 x 12.7 x 180mm, Taper Punches; Ø2 x 9.5 x 120, Ø3 x 9.5 x 120, Ø4 x 9.5 x 120, Ø5 x 9.5 x 120, Ø6 x 9.5 x 120mm, Stand |
| Nett Weight | 1.71kg |
| Model No | SM94 |
|---|---|
| Brand | Sealey |
| Chisel Capacity | 6 - 12mm |
| Chuck Capacity | 13mm |
| Dimensions (W x D x H) | 340 x 355 x 640mm |
By sharing your email, you agree to our privacy policy & terms of service
Cart
POPULAR CATEGORY
