An axe and a maul are shaped for opposite jobs. An axe has a thin blade that cuts across the grain to fell or limb. A maul has a thick wedge that splits along the grain and would bind if it were used to cut. Using either for the other job is slow and hard on the tool.
Head weight then sets how much work each swing does and how many swings can be made. The range runs 680g on a light felling axe up to 2.7kg on the splitting mauls, and a heavier head splits more per blow at the cost of tiring the user faster. Draper hold Expert axes and mauls across that span on fibreglass shafts with plain shafted mauls alongside.
Shaft material changes what the tool feels like at the point of impact. Fibreglass absorbs shock and does not rot or dry out, which suits a tool left outdoors. A one-piece forged steel Estwing has no joint to fail at all, which is why they are chosen where reliability matters more than shock. A shaft that has dried out in a shed is the usual reason a wooden handled axe head works loose.
Hatchets and riggers axes cover the light end at 17 inches and 2.6lb, for limbing and camp work rather than felling. Log splitters as machines are a different product entirely and sit on the wood working leaf. Send the timber type to 07754288583 on WhatsApp for a recommendation.
| ITEM NO. | 01987 |
|---|---|
| Engine Type | 196cc EURO V singe-cylinder OHV 6.5hp petrol |
| Splitting Force | 8 TON |
| Hydraulic Pressure | 25MPa |
| Hydraulic Oil Capacity | 3.5ltr HP32 hydraulic oil |
| Dimensions | H 330 x W 290/355 x D 22mm |
|---|
By sharing your email, you agree to our privacy policy & terms of service