Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Sub Category

FAQs

It follows the material. A drill driver turns only, for wood and metal. A combi drill adds hammer action for masonry. An SDS+ rotary hammer drives the bit with a piston and is the only sensible choice for concrete.

No. An SDS+ chuck takes only SDS+ shanks, which lock in and slide rather than being gripped. A round-shank bit will not enter it and an SDS bit will not hold in a keyed or keyless chuck.

Corded machines at 900W, 1050W and 1500W suit sustained masonry work and never stop for a battery. Cordless 20V brushless machines go to the work, which matters where there is no supply at the position.

A drill driver with a hammer action added, so it drills wood and metal and also handles masonry. It is not a substitute for an SDS machine on concrete, but it covers a wider range than a plain drill driver.

Kits pairing a combi drill with an impact driver cover the two most common cordless jobs in one purchase, and arrive with batteries and charger. On an existing platform, bare bodies and a battery bundle are usually the better route.

With a drill guide. The guide with six bushes from 4 to 12mm holds a hand drill perpendicular to the work, which is the accurate alternative where a pillar drill is not available.

Clear

Power Drills

FilterFilters
View as Grid List

Drill type is the first decision and it is decided by the material. A drill driver turns and nothing else, which suits wood and metal. A combi drill adds a hammer action for masonry. An SDS+ rotary hammer drives the bit with a piston rather than a clutch, which is what gets through concrete at a rate the other two cannot approach.

Chuck system follows from that and is a hard fitment. A keyed or keyless chuck takes round-shank bits. An SDS+ chuck takes only SDS+ shanks, which lock in and slide rather than being gripped. A standard bit will not go into an SDS machine and an SDS bit will not hold in a standard chuck. Impact drills at 550W sit between a combi drill and an SDS machine, hammering through the chuck rather than with a piston.

Platform or wattage then sizes the machine. Corded SDS bodies run 900W, 1050W and 1500W, and cordless machines sit on the Draper DXPULSE 12V and D20 20V brushless ladders and the Sealey SV series. Corded machines suit sustained masonry work; cordless machines go to the work.

Kits pairing a combi drill with an impact driver cover the two most common cordless jobs in one purchase, and battery bundles from 2Ah upward keep a platform running. A drill guide with six bushes from 4 to 12mm holds a hand drill square, which is the accurate alternative to a pillar drill. Questions go over WhatsApp on 07754288583. Draper run DXPULSE 12V and D20 20V brushless ladders with Sealey SV bodies covering the same ground.

Show Only My Country Products
In this feature, you can view only your country products.
Showing 61 to 66 of 66 entries
FAQs

It follows the material. A drill driver turns only, for wood and metal. A combi drill adds hammer action for masonry. An SDS+ rotary hammer drives the bit with a piston and is the only sensible choice for concrete.

No. An SDS+ chuck takes only SDS+ shanks, which lock in and slide rather than being gripped. A round-shank bit will not enter it and an SDS bit will not hold in a keyed or keyless chuck.

Corded machines at 900W, 1050W and 1500W suit sustained masonry work and never stop for a battery. Cordless 20V brushless machines go to the work, which matters where there is no supply at the position.

A drill driver with a hammer action added, so it drills wood and metal and also handles masonry. It is not a substitute for an SDS machine on concrete, but it covers a wider range than a plain drill driver.

Kits pairing a combi drill with an impact driver cover the two most common cordless jobs in one purchase, and arrive with batteries and charger. On an existing platform, bare bodies and a battery bundle are usually the better route.

With a drill guide. The guide with six bushes from 4 to 12mm holds a hand drill perpendicular to the work, which is the accurate alternative where a pillar drill is not available.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service