Search
Search

Oops! We didn’t find any matching result

Main Menu
Phone Phone 01926754100 Cart Cart
Fit guarantee icon
FIT GUARANTEE or Hassle-Free Returns
Quick delivery icon
QUICK DELIVERY On All Products Across UK
Customer support icon
GREAT SUPPORT 24/7 Support For Any Query
rating icon
TOP RATED Trusted by Our Customers

Shop by Category

FAQs

Hand grease guns: lever-action or pistol-grip mechanical operation, no power supply needed, cheapest, suited to occasional use and small-scale lubrication service. Pneumatic grease guns: powered from workshop compressed air, fast continuous operation, suited to high-volume workshop bench-side use; require a workshop air supply. Battery grease guns: cordless mobility, suited to mobile-service and field work; modern Li-ion battery models offer continuous run-time on routine grease cartridges. For trade workshops, pneumatic at the bench plus battery for mobile work is a typical setup.

Greases are graded by NLGI consistency (00, 0, 1, 2, 3 — increasing in stiffness) and by base-oil-and-thickener chemistry (lithium, calcium, polyurea, calcium-sulphonate). NLGI 2 lithium-complex grease is the workshop standard for most automotive and machinery applications — covers wheel bearings, chassis lubrication, and general-purpose use. NLGI 0 or 00 (semi-fluid) for centralised lubrication systems. Specialist greases (high-temperature, high-load, food-grade) for specific applications. The grease specification is on every cartridge product page.

Three causes of grease leakage at the gun head: (1) the grease nipple is damaged or blocked — clean or replace the nipple; (2) the gun head doesn't fully seat on the nipple — clean both surfaces and ensure the head clicks into place; (3) the gun head is damaged or worn — replace with a new head matched to the gun model. For high-pressure grease guns where leakage continues, the head's internal valve may be worn — full head replacement is typically the answer.

Yes. Bulk grease kegs (typical 12.5kg or 18kg containers) with the matching grease-keg pumps and follower-plates are available for high-volume workshop and fleet-service applications — significantly more economical per kg than 400g cartridges. The keg pump dispenses directly to the workshop guns or to centralised lubrication system reservoirs. Match the keg fitting and the pump compatibility to the workshop's grease specification. Search the bulk-lubrication category, or WhatsApp 07754288583.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Mechanics Lubrication & Grease Guns

Within Fuel, Coolant & Lubrication Repairs, Mechanics Lubrication and Grease Guns covers the lubrication tools and equipment used in workshop service work — covering hand-operated grease guns, pneumatic and battery-powered grease guns, oil-can lubricators, oil dispensers and pump-action lubricators, grease nipples and fittings, and the matching grease cartridges and lubricant containers used in workshop machinery and vehicle service. Parts for Machines supplies mechanics lubrication tools across the trade and professional ranges, covering both general-purpose grease guns (suited to workshop bench-side use) and the specialist lubrication equipment for high-volume service applications. We are an authorised distributor and seller of Sealey and SIP across the lubrication tool range. Sealey and SIP cover the trade-grade hand and power-operated grease guns, the matching grease-cartridge feed systems (typical 400g cartridge with screw-thread or quick-fit head), oil-can lubricators in the standard pump-and-flexible-spout configurations, and the workshop-bench grease-fitting and dispensing accessories. Product pages list the equipment type (hand grease gun, pneumatic grease gun, battery grease gun, oil-can, dispenser pump), the cartridge or container size (typical 400g grease cartridge for hand guns; bulk 12.5kg or 18kg keg for high-volume work), the operating method (hand-pumped, lever-action, or pneumatic), the discharge specification (in grams per stroke for hand pumps; in grams per minute for pneumatic), the operating pressure (typical 350-700 bar at the grease nipple from a pneumatic gun), the head type (standard bayonet, screw-on, or quick-fit fittings), and the fluid compatibility for oil cans (some are NLGI grease-rated, others oil-only). For trade workshops doing daily lubrication service work (fleet vehicle servicing, plant equipment greasing, machinery service), pneumatic or battery grease guns significantly speed up routine work compared with hand-operated equivalents. Match the grease-cartridge size to the typical service volume. Trade pricing on bulk-cartridge and equipment orders is available; contact the team via WhatsApp 07754288583.
FAQs

Hand grease guns: lever-action or pistol-grip mechanical operation, no power supply needed, cheapest, suited to occasional use and small-scale lubrication service. Pneumatic grease guns: powered from workshop compressed air, fast continuous operation, suited to high-volume workshop bench-side use; require a workshop air supply. Battery grease guns: cordless mobility, suited to mobile-service and field work; modern Li-ion battery models offer continuous run-time on routine grease cartridges. For trade workshops, pneumatic at the bench plus battery for mobile work is a typical setup.

Greases are graded by NLGI consistency (00, 0, 1, 2, 3 — increasing in stiffness) and by base-oil-and-thickener chemistry (lithium, calcium, polyurea, calcium-sulphonate). NLGI 2 lithium-complex grease is the workshop standard for most automotive and machinery applications — covers wheel bearings, chassis lubrication, and general-purpose use. NLGI 0 or 00 (semi-fluid) for centralised lubrication systems. Specialist greases (high-temperature, high-load, food-grade) for specific applications. The grease specification is on every cartridge product page.

Three causes of grease leakage at the gun head: (1) the grease nipple is damaged or blocked — clean or replace the nipple; (2) the gun head doesn't fully seat on the nipple — clean both surfaces and ensure the head clicks into place; (3) the gun head is damaged or worn — replace with a new head matched to the gun model. For high-pressure grease guns where leakage continues, the head's internal valve may be worn — full head replacement is typically the answer.

Yes. Bulk grease kegs (typical 12.5kg or 18kg containers) with the matching grease-keg pumps and follower-plates are available for high-volume workshop and fleet-service applications — significantly more economical per kg than 400g cartridges. The keg pump dispenses directly to the workshop guns or to centralised lubrication system reservoirs. Match the keg fitting and the pump compatibility to the workshop's grease specification. Search the bulk-lubrication category, or WhatsApp 07754288583.

Every product is backed by our Fit Guarantee. If a part is incompatible with your machine, you can return it hassle-free. For damaged-on-arrival items, report within 24 hours with photographs to [email protected] — we will arrange collection. For other returns, email us first to obtain a Return Merchandise Number before sending. Returns are accepted within 30 days of purchase, in original packaging, on UK orders. A restocking fee may apply on returns where the buyer has changed their mind. Refunds are issued to the original payment method once the return is inspected.

Delivery time depends on the product, your destination, and availability — the estimated time for any item appears on the product page, and "Check where we deliver" confirms coverage for your postcode before you order. Next-day delivery is available on most products; the option appears at checkout when applicable. We deliver across the UK, Europe, the Middle East, and Africa. Use the country selector at checkout to confirm coverage and delivery options for your destination.

Get exclusive updates on offers & latest trends in construction industry

By sharing your email, you agree to our privacy policy & terms of service