Cart
POPULAR CATEGORY
ADD TO CART
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £74.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £74.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | FREE | 2 to 4 working days |
| Next Day | £9.99 |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £74.95 | 5 to 7 working days |
Product Number: SR2000
Versatile MIG welding for workshop, garage, and site use. Suitable for steel and aluminium, it welds studs, washers, and tabs, with a patented quick-puller for smaller dents without studs at all.
Machine weight: 11.92kg.
Suitable for use on steel or aluminium and can weld studs, washers and tabs.
Fan-assisted cooling manages operating temperature during sustained welding. Automatic thermal overload protection cuts output if the machine exceeds safe temperature. Buyers searching for a gas MIG welder, inverter MIG welder, or gasless MIG welder will find the SR2000 covers both gas and gasless modes. Gas shielding with CO₂ or Argon mix produces clean welds on mild steel and stainless steel; switch to flux-cored wire for outdoor and site work. The wire feed system delivers consistent wire speed for stable arc performance across the output range. Backed by Sealey's product guarantee for peace of mind. Replacement consumables including contact tips, nozzles, and electrodes for the SR2000 are available at PartsForMachines.com. Refer to the operating manual for full setup instructions, safety information, and recommended maintenance intervals.
Additional Information:
About PartsForMachines:
PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specializing in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalog of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Model No | SR2000 |
|---|---|
| Brand | Sealey |
| Nett Weight | 11.92kg |
| Contents | Welding Gun, Power Unit, Quick Puller, Electrodes for Welding, Washers; Round (x10), Triangle (x10), 55 x 22mm Tabs (x10), M4 x 15 Studs (x10), M4 Puller Washer, Earth Bars; 70mm (x2), 155mm |
| Supply | 230V |
| Mains Fuse | 13A |
| Maximum Short Circuit Current | 5000A |
| Voltage Range | 18V AC Output 24V DC, 32V AC Output 44V DC, 18V AC Output 24V DC |
| Weight of Gun | 2.25kg |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price | |
|---|---|---|---|---|---|
|
SR2000.E | Sealey SR2000.E Welding Electrode Kit for SR2000 Spot Welder | 1 Unit |
£56.12
£55.00
|
Add |
|
SR2000.SW | Sealey SR2000.SW Star Washers for SR2000 Stud Welder - Pack of 10 | 1 Unit |
£10.04
£9.84
|
Add |
|
SR2000TS | Sealey SR2000TS Tab Shooter Accessory for SR2000 Stud Welder | 1 Unit |
£93.08
£91.25
|
Add |
|
SR2000.T | Sealey SR2000.T Welding Tabs for SR2000 - Pack of 10 | 1 Unit |
£14.05
£13.77
|
Add |
|
SR2000.AMS | Sealey SR2000.AMS Al-Mg-Si Welding Studs for SR2000 Stud Welder - Pack of 10 | 1 Unit |
£9.71
£9.52
|
Add |
|
SR2000.PW | Sealey SR2000.PW Pull Washers for SR2000 - Pack of 10 | 1 Unit |
£12.25
£12.01
|
Add |
|
SR2000.AM | Sealey SR2000 Al-Mg Welding Studs 5x15mm Pack of 10 | 1 Unit |
£9.30
£9.12
|
Add |
|
SR2000.TW | Sealey SR2000 Welding Triangle Washers Pack of 10 | 1 Unit |
£10.04
£9.84
|
Add |
Pro Tips for Buying Welding Machines: Types, Uses, and Choosing the Perfect Fit Introduction:Welding, the art of joining metals through heat and precision, has evolved significantly with the advent of adv...
Gas or Gasless MIG Welder? Bottles, 13A Plugs and Thin Panels Buying a first MIG welder brings the same worries every time. Do I need a gas bottle? Will it run off a 13A socket? Will it blow holes in car panels? Decide ga...
Disposable MIG Gas Bottle Empty Already? Make It Last or Go Big The gas runs out halfway through a repair, or a bottle you fitted last weekend is already flat. A disposable bottle gives minutes of welding, not hours: make...
Standard Delivery: UK Mainland Free
Next Day Delivery Available
Delivery Estimate: 2 to 4 working days
Save Extra With 1 Offer
Compare With Similar Items
Compare with Similar products
|
Sealey MIGHTYMIG170 Professional Gas/No-Gas MIG Welder 170A with Euro Torch
£548.81
£537.83
2% OFF
Free delivery in UK Mainland
|
SIP 25288 HELVi Professional Spotweld 22E, 230v, Single Phase
£909.72
£891.88
2% OFF
Free delivery in Channel Island
|
|||
| Technical Specification | |||||
|---|---|---|---|---|---|
| PRODUCT NUMBER | 34310 | 70088 | MIGHTYMIG170 | MINIMW120i | 25288 |
| Warranty | 24 | ||||
| Type | MIG | Inverter MIG | |||
| Duty Cycle | 100% @ 55A, 60% @ 70A, 15% @ 140A | 100% @ 93A, 60% @ 120A | |||
| Length (mm) | 100 | ||||
| Voltage (V) | 230 | 230 | 230 | ||
| Weight (kg) | 41.5 | 3.7 | 120 | ||
A. The SR2000 supports multiple welding processes. Suitable for aluminium.
A. The SR2000 requires a 230V supply. If you are unsure whether your supply is adequate, consult a qualified electrician before installation.
A. The SR2000 is fitted with thermal overload protection that cuts output automatically if the machine exceeds its rated temperature. Welding at lower amperages extends the continuous run time available before a cool-down period is needed.
A. The SR2000 is supplied with the accessories needed to start welding — check the product listing for the complete included items. Additional consumables for the SR2000 are available at PartsForMachines.com.
A. The SR2000 weighs 11.92kg and includes a carry handle for transport between locations. It can be moved by a single person and is suited to workshop use.
A. The SR2000 is primarily suited to mild steel.
A. Yes. The SR2000 is fitted with automatic thermal overload protection that cuts output if the machine exceeds safe operating temperature. It will restart automatically once it has cooled. Operating within the rated duty cycle minimises the frequency of thermal interruptions.
A. The SR2000 is primarily designed for workshop use. For outdoor or site use, protect the machine from rain and dust. IP21S rating provides limited splash resistance but not weatherproofing.
A. For gas MIG welding, yes — you need a CO₂, Argon, or CO₂/Argon mix cylinder with a regulator and hose (purchased separately at PartsForMachines.com). The SR2000 also supports gasless flux-cored wire for outdoor work or sites where bottled gas is impractical — switch between modes by reversing the torch polarity.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
