V-TUF H1.003TT-KTQ 300mm tufTURBO300X Wall Surface Cleaner With Handle and 51mm Extraction Port - KTQ Inlet With Jets, 275 Bar, 40 Litre/min

Q 1. What is the delivery time?

A. Standard UK Mainland delivery is 3–5 working days.

Q 2. Are delivery charges included in the product price?

A. No, delivery charges are calculated separately at checkout based on order weight, size, and delivery location. 

Q 3. What is your return policy?

A. We accept returns within 30 days of purchase for items that are unused, undamaged, and in their original packaging. Returns are available only for UK-delivered orders and must include proof of purchase.

Before returning an item, please contact us at [email protected] to obtain a Return Merchandise Number (RMN). You may also be asked to share images of the product and its packaging for verification.

Items that do not meet these conditions will not be accepted for return. If your return is approved, we will initiate a refund to your credit card or original method of payment. A restocking fee of up to 15% of the order value may apply to each returned item.

Q 1. What is the V-TUF H1.003TT-KTQ wall surface cleaner designed for?

A. It is a 300 mm stainless tufTURBO wall cleaner for cleaning cladding, concrete, brick and stone walls with controlled spray and waste extraction.

Q 2. What special feature does the H1.003TT-KTQ have for waste handling?

A. It includes a 51 mm extraction port that allows connection to suitable vacuums to help capture and remove contaminated wash water.

Q 3. What maximum pressure and flow can the H1.003TT-KTQ handle?

A. It is rated up to 275 bar, about 4000 psi, and can handle flow rates up to about 40 litres per minute.

Q 4. Which pressure washers are compatible with the H1.003TT-KTQ cleaner?

A. It works with V-TUF petrol, diesel and electric washers such as TORRENT, DD, GB and RAPID ranges that have compatible KTQ connections and suitable output.

Q 5. What inlet connection does the H1.003TT-KTQ wall cleaner use?

A. It uses a Duraklix KTQ plug inlet, suitable for attaching to TG350FKTQPB or TG350FKTQMSQ triggers and lance systems.

Q 6. How does V-Spin technology enhance the H1.003TT-KTQ cleaner?

A. The high-speed stainless swivel and rotor arm provide consistent spinning jets, giving even, efficient cleaning performance on vertical surfaces.

Q 7. What ergonomic feature improves control of the H1.003TT-KTQ?

A. It has a side handle that gives greater control when cleaning vertical surfaces, helping the operator maintain stable movement.

Q 8. Does the H1.003TT-KTQ help minimise environmental contamination?

A. Yes, the extraction port and rigid stainless skirt help contain and extract harmful waste water instead of letting it run freely.

Q 9. What applications is the H1.003TT-KTQ commonly used for?

A. It is used for cleaning cladding, concrete walls, brickwork and stone facades on industrial buildings, warehouses and commercial sites.

Q 10. Can the H1.003TT-KTQ be used with hot water?

A. Yes, it can be used with hot water up to around 150 degrees Celsius when paired with a suitable hot pressure washer.

Q 11. How portable is the H1.003TT-KTQ surface cleaner between sites?

A. It is relatively compact and designed to be collapsible for easier transport and storage with other cleaning equipment.

Q 12. What warranty is supplied with the V-TUF H1.003TT-KTQ wall surface cleaner?

A. The unit includes a twelve month warranty against manufacturing defects when used within its specified operating limits.

Q 13. What task does the V TUF H1.003TT KTQ surface cleaner specialise in?

A. It is designed for vertical wall cleaning with slurry capture using compatible pressure washers and extraction equipment.

Q 14. What deck size and rating does this wall cleaner offer?

A. The hood covers about 300 millimetres and is rated for pressures up to roughly 275 bar, 40 litres per minute and 150 degrees Celsius.

Q 15. How does the integrated extraction port assist during sensitive cleaning work?

A. The 51 millimetre extraction port allows connection to suitable vacuum or extraction systems to remove dirty water and debris efficiently.

Q 16. Which surfaces are typically treated with the H1.003TT KTQ attachment?

A. It is intended for cladding, brick and concrete walls where controlled splash and slurry capture are important.

Q 17. How does V Spin technology with twin jets benefit wall cleaning?

A. Twin jets and the V Spin swivel maintain a consistent spray pattern across the deck, supporting even cleaning on vertical surfaces.

Q 18. What type of quick release connection does this cleaner use?

A. It uses a KTQ style quick release inlet compatible with specific V TUF triggers such as TG350FKTQPB.

Q 19. Who are the primary professional users for this wall cleaning tool?

A. Facilities managers, construction contractors and restoration specialists working on building façades and internal walls are key audiences.

Q 20. How portable is the H1.003TT KTQ between projects?

A. With dimensions around 300 by 400 by 250 millimetres and weight about one and a half kilograms, it is easy to carry and store.

Q 21. How does the stainless skirt help when used on vertical surfaces?

A. The skirt helps keep splash close to the work area, supporting cleaner surroundings while the jets and extraction handle slurry.

Q 22. Why is stainless steel construction beneficial on this model?

A. Stainless components give good resistance to corrosion and wear when used outdoors or on exposed building exteriors.

Q 23. In which environments does the combination of cleaning and extraction provide particular value?

A. It is useful in areas where runoff must be controlled, such as around sensitive façades, entrances or internal walls.

Q 24. How does this attachment complement flat surface cleaners in a contractor’s kit?

A. Contractors can use flat surface cleaners on ground areas and this wall cleaner for vertical sections, maintaining a controlled finish across structures.