.jpg?v=1791969583)
Save Extra With 1 Offer
A. The Victron Energy BAT412151084 has a rated capacity of 165Ah measured at the C20 discharge rate, meaning it will deliver that capacity when discharged fully over a 20-hour period under standard conditions.
A. The BAT412151084 is a 12-volt battery, suitable for 12V DC systems including marine, off-grid, and commercial applications.
A. AGM stands for Absorbent Glass Mat. In this construction, the electrolyte is suspended within a glass mat separator rather than being free liquid. This results in very low internal resistance, making the battery well suited to high-current discharge applications such as inverters, winches, and bow thrusters, as well as repeated deep cycle use.
A. Victron Energy's VRLA AGM range, including this model, carries a stated design life of 7 to 10 years under correct operating and charging conditions.
A. Polarity should be verified directly against the product label on delivery. No fixed polarity orientation is confirmed in published specifications for this SKU, so please check before connecting.
A. The AGM technology used in this battery is compatible with start-stop systems in principle; however, suitability for a specific vehicle must be verified against the product label and your vehicle manufacturer's requirements. This is a deep cycle battery primarily intended for sustained discharge applications rather than engine starting.
A. No CCA or MCA rating is published for the BAT412151084. This product is classified as a deep cycle battery and is optimised for sustained energy delivery rather than engine cranking applications.
A. Related variants available through PartsForMachines include BAT406225084 and BAT412201084, which offer alternative specifications within the same Victron Blue Power AGM Deep Cycle family. Check individual product listings for capacity and voltage details.
A. Standard delivery to UK mainland addresses is 1–3 working days. A 30-day returns policy applies. For specific delivery queries or remote locations outside UK mainland, please contact PartsForMachines prior to ordering.
A. The battery measures 510mm (length) × 200mm (width) × 280mm (height including terminals) and weighs 44.5 kg. Ensure your battery compartment and hold-down arrangements can accommodate these dimensions and the weight prior to installation.
By sharing your email, you agree to our privacy policy & terms of service