Cart
POPULAR CATEGORY
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £19.95 | 7 to 10 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 3 to 5 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 5 to 7 working days |
| SERVICE | DELIVERY PRICE | DELIVERY TIME |
|---|---|---|
| Standard Delivery | £7.99 | 7 to 10 working days |
Product Number: S2-1150GEL
Variations
Deep-cycle stationary applications demand a battery chemistry capable of withstanding prolonged partial state-of-charge operation, wide temperature variation, and extended service cycles without compromise. The Rolls S2-1150GEL is a 2V valve-regulated gel battery rated at 1308Ah (C20) and 1150Ah (C10), engineered for commercial and industrial installations where reliability over a long service horizon is non-negotiable.
Manufactured by Rolls Battery Engineering to DIN standards, the OPzV range combines immobilised gel electrolyte technology with tubular positive plate construction. The die-cast positive grid and proprietary gel formula work in concert to suppress electrolyte stratification, resist grid corrosion, and maintain consistent electrochemical performance across repeated deep-discharge cycles. Valve-regulated construction eliminates routine water addition and significantly reduces off-gassing under normal operating conditions." The S2-1150GEL measures 233mm (L) × 210mm (W) × 673mm (H inc. terminal) and weighs 82kg. Terminal configuration and polarity should be verified against the product label prior to installation. No direct cross-reference codes are confirmed for this unit. The battery is not confirmed for start-stop applications; refer to the product label for fitment guidance. "This model forms part of the Rolls OPzV GEL 2V range, available across multiple capacity grades from 224Ah through to 1620Ah (C10), allowing system designers to configure appropriate series and parallel strings for the required bank voltage and energy storage capacity.
The S2-1150GEL is supplied with a 3-year warranty, reflecting the manufacturer's confidence in build quality and long-term cycle performance under commercial operating conditions.
Delivery: pallet shipment, typically 3–5 working days within UK mainland. Contact PartsForMachines for delivery quote. 30-day returns.
FS Range With the ever increasing demand placed on batteries in today’s tough markets, reliability is key. Rolls 6V, 8V and 12V models incorporate a new plate design with a larger surface area and higher density paste, providing increased performance for high cycle applications. Powerful and dependable, these popular models provide ample power for floor cleaning equipment, golf cart, electric vehicles, traffic management systems & material handling equipment.
Key Feature:Built for industrial and construction machinery, supplying consistent power output and resilience to meet demanding start-stop and auxiliary power needs in tough operating conditions.
Uses:PartsForMachines is a premier e-commerce platform, founded in 2019 in Warwickshire, UK, specialising in aftermarket parts and services for construction, agriculture, and industrial machinery. We offer an extensive catalogue of over 500,000 products. Standard delivery: 1–3 working days within UK mainland. We are proud to be an authorised distributor, giving customers extra confidence when purchasing genuine products from us. In addition, we provide a 30-day return policy for eligible items.
| Brand | Rolls Battery Engineering |
|---|---|
| Voltage | 2V |
| Capacity AH (C20) | 1308Ah |
| Cold Cranking Amps (EN) | |
| L × W × H | 233mm × 210mm × 673mm |
| Warranty period | 3 Years |
| Weight (Kg) | 82 |
| Capacity AH (C5) | |
| Capacity AH (C10) | 1150Ah |
| Capacity AH (C100) | |
| Marine Cranking Amps (MCA) | |
| Watt-Hours (WH) | |
| Length (mm) | 233 |
| Width (mm) | 210 |
| Height Inc. Terminal (mm) | 673 |
| Terminal Placement | |
| Terminal Type | |
| Hold Down | |
| Case Size | |
| ETN Number | |
| TTNR |
| Engine Parts | Product Number | Product Name | Recommended Units | Product Price |
|---|
Expert Guidelines for Preserving Your Heavy Equipment Battery Heavy machinery, including forklifts, bulldozers, and excavators, relies on robust batteries to minimize downtime and maximize operational availability. These batteries must endure even more challenging conditions than typical automotive batteries. Moreover,...
Standard Delivery: £7.99
Delivery Estimate: 3 to 5 working days
Save Extra With 1 Offer
Compare With Similar Items
A. The S2-1150GEL is rated at 1308Ah at the C20 rate and 1150Ah at the C10 rate. The C10 figure forms the basis of the model designation. Always specify the discharge rate when sizing a battery bank to ensure the installed capacity meets your system requirements.
A. The S2-1150GEL uses OPzV technology, which combines an immobilised gel electrolyte with tubular positive plate construction. The positive grid is die-cast and the gel formula is proprietary to Rolls Battery Engineering. This combination suppresses electrolyte stratification and resists grid corrosion over extended cycling.
A. The S2-1150GEL is a 2V cell. To achieve a higher system voltage, cells are connected in series: 6 cells in series produce 12V, 12 cells produce 24V, 24 cells produce 48V, and so on. Capacity can be increased by connecting strings in parallel. Rolls OPzV cells are designed specifically for this type of series-parallel stationary battery configuration.
A. Polarity must be verified against the label on the individual unit prior to installation. PartsForMachines does not confirm a fixed polarity arrangement in the product data for this model. Incorrect connection can result in irreversible damage and will void the warranty.
A. No. The S2-1150GEL is an OPzV stationary deep-cycle cell intended for commercial and industrial energy storage applications such as solar, UPS, and telecoms. It is not confirmed for start-stop automotive use. Refer to the product label and consult Rolls Battery Engineering if you have a specific application query.
A. As a valve-regulated gel battery, the S2-1150GEL does not require routine electrolyte top-up. Under normal operating conditions, off-gassing is minimal. Installation should follow the manufacturer's guidelines regarding ventilation, charge voltage settings, and operating temperature range. Periodic inspection of terminals and charge voltage calibration is recommended.
A. The range spans from the S2-224GEL (224Ah C10) through S2-280GEL, S2-336GEL, S2-405GEL, S2-486GEL, S2-567GEL, S2-690GEL, S2-920GEL, and S2-1150GEL, up to S2-1380GEL and S2-1620GEL. All are 2V OPzV gel cells manufactured to DIN standards, allowing flexible system sizing across the full range.
A. The Rolls S2-1150GEL is supplied with a 3-year manufacturer's warranty. This covers defects in materials and workmanship under normal operating conditions. Warranty claims should be raised with PartsForMachines; any claim arising from incorrect installation, improper charging, or physical damage will be assessed accordingly.
A. Due to its weight of 82kg, the S2-1150GEL is dispatched on a pallet. Delivery to UK mainland typically takes 3–5 working days. Contact PartsForMachines directly for a delivery quote, including any requirements for off-mainland UK locations. A 30-day returns policy applies; goods must be returned in their original condition and packaging.
A. The battery measures 233mm (length) × 210mm (width) × 673mm (height including terminal) and weighs 82kg. These dimensions should be verified against your enclosure or battery rack specification before ordering, particularly given the height with terminal fitted.
By sharing your email, you agree to our privacy policy & terms of service
Question about this product? Click here
 .png)
